Conceptronic CSP2LI Télécharger Pilotes

Disponibles 2 fichiers pour CSP2LI
Constructeur
Conceptronic
Catégorie
Réseaux
Modèle
Conceptronic CSP2LI
Description
Drivers
Système d'exploitation
Windows 2000-XP
Version Driver
4.607
Taille
2.2Mb
Nom de fichier
w2kxp_c.exe
Constructeur
Conceptronic
Catégorie
Réseaux
Modèle
Conceptronic CSP2LI
Description
Drivers
Système d'exploitation
Windows 95-98-Me
Version Driver
4.606
Taille
3.1Mb
Nom de fichier
win9x_c.exe

The following is the important information of Conceptronic CSP2LI installation driver.



Installation instructions for Networks Cards Only.
Important! These instructions may not be applicable to other device networks.

  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the CSP2LI model that was downloaded (for example c:\CSP2LI). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • Install the card Conceptronic CSP2LI in the slot and connect the cable to the network; turn on the computer and start Windows.

  • When Windows starts, a "Found New Hardware Wizard" dialog box appears identifying the card as a "Ethernet Controller"; Select "Search for a suitable driver for your device (Recommended)".

    NOTE, if the "Found New Hardware Wizard" dialog box does not appear, Windows fails to detect your adapter. There may be problem with the adapter itself or with the system BIOS.

  • Click Next then enable the "Specify a location" check box; specify the correct path in which Conceptronic CSP2LI Adapter driver for Windows resides.

  • Click Next then Windows identifies the card as "Conceptronic CSP2LI"

  • Click Next to let Windows finishes the driver installation.

  • Search and consult the Readme file for additional installation drivers instructions for your Conceptronic CSP2LI.



  • If during installation in Windows, you will be prompted with a message warning that the driver software for CSP2LI has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by Conceptronic, and safe to use.

Depending on the environment that you are using, a Windows driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official driver provided by Conceptronic for CSP2LI.

Conceptronic CSP2LI Configuration:

1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "System" icon.
4. Click "Hardware" tab then click "Device Manager..."
5. Open "Network Adapters" icon.
6. Double click "Conceptronic CSP2LI" then a properties page appears.


Disponibles 2 Pilotes

HelpDrivers Depuis Mars 2000