Conceptronic CSP100TU Télécharger Pilotes

Disponibles 1 fichiers pour CSP100TU
Constructeur
Conceptronic
Catégorie
Réseaux
Modèle
Conceptronic CSP100TU
Description
Drivers
Système d'exploitation
Windows 98-Me-2000-XP
Version Driver
1.0
Taille
101Kb
Nom de fichier
csp100tu.exe
Informations
Driver Diskette (Ver 1.1) Overview
For USB 10/100 Ethernet Adapter
OCT.2001
TOPIC
==================================================
1. BEFORE INSTALLATION
2. DISKETTE CONTENTS
3. NDIS 5 DRIVER FOR WINDOWS 98/ME/2000/XP INSTALLATION
4. LINUX DRIVER INSTALLATION
==================================================

[1] BEFORE INSTALLATION

In order to use this device, you must have a copy of Microsoft
Windows 98,ME(or Windows 2000/XP) operating system installed on your PC.
Some versions of Windows 95 version B (OSR2) don't support USB,
but the device drivers included in this package are designed
specifically for Windows 98,ME and Windows 2000/XP.
if you do not have Windows 98,ME or Windows 2000/XP, this device will not work.
[2] DISKETTE CONTENTS

Files and
Subdirectories Contents
--------------------------------------------------------------------
README.TXT How to install Ndis5 driver
USBKR100.INF Installation file for Windows 98,ME, Windows 2000,XP
USBKR100.SYS NDIS 5 Miniport Driver
Win98\ NDIS 5 Miniport Driver
Winme\ NDIS 5 Miniport Driver
Win2000\ NDIS 5 Miniport Driver
WinXP\ NDIS 5 Miniport Driver
Linux\ How to install linux driver
\MANUAL\manual.htm Manul Document
--------------------------------------------------------------------
[3] NDIS 5 DRIVER FOR WINDOWS 98,ME,2000,XP INSTALLATION

INSTALLATION PROCEDURE:

1) Make sure your PC is powered on and that you are at the Windows
operating system.

2) Insert the USB cable(the A-type connector) into the USB port
on your PC.The system will display the "Add New Hardware Wizard"
dialog box.
Insert the "USB 10/100 Ethernet Adapter" driver diskette into floppy
driver and then press "Next" button.

3) Select "Search for the Best Driver for your device (Recommended)",
press "Next" button.

4) Select "Floppy disk drives" (or select "Specify a location" and type
A:\ in the location), where the device information file (.INF file)
and the driver USBKR100.SYS can be found.

5) Press "Next" button, the driver then installs itself. If windows
require for Windows sources diskette ,
Insert the CD-ROM or disks as needed, direct Windows to the proper
location, and then click "OK" button.

6) Click "Finish" to complete the installation process.

7) Reboot the PC to start the network.
HelpDrivers Depuis Mars 2000