Conceptronic C56CL100 Télécharger Pilotes

Disponibles 1 fichiers pour C56CL100
Constructeur
Conceptronic
Catégorie
Réseaux
Modèle
Conceptronic C56CL100
Description
Drivers
Système d'exploitation
Windows 95-98-Me-NT-2000
Version Driver
1.0
Taille
425Kb
Nom de fichier
56cl100.zip
Informations
Conceptronic L56CL100

Manual Update Supplement

!!!!!!Note!!!!!!!

For a quick start simply run INSTALL.EXE on the root of this Driver disk.

!!!!!!!!!!!!!!!!!

This document contains information that supplements the "User's Manual"
and accompanying software. The User's Manual can be found in the root of the
driver disk as MANUAL.TXT.

Contents
컴컴컴컴
Introduction
PCMCIA Driver Installation
Getting Started
EMM386 Usage with LanModem
Driver Directory Structure
Support Options
Copyrights, Trademarks, and Disclaimers

Introduction
컴컴컴컴컴컴
Thank you for purchasing the Conceptronic L56CL100.
This diskette has network driver support for
the PC Card. There is a format change for this driver disk.
All README's have been reformatted, an easy setup program,
and consistency on all documentation provided.

We hope our new readme's and installation will minimize the users
effort to make our products work. Should you have further
recommendations please contact the support manager.

Install PC Card Software Manually
컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴
The installation software has been carefully designed to detect
a combination of hardware and software installed on the PC. Proper
detection will allow the PC's PC Card drivers to enable the
PC Card. If the installation software fails to complete, the enabler
will need to be manually copied from the driver disk to the PC.

If Windows for Workgroup 3.11, Windows NT, or Windows 95/98 are used,
follow the instructions for installing PC Cards in the PC's manual.

Determine if any third party generic enablers installed on the PC.
These are identified by a search through the CONFIG.SYS file for
the following lines:

Vendor Device Loaded in CONFIG.SYS
--------------- -------------------------------
Awards Software DEVICE=C:\CARDWARE\PCENABLE.EXE
System Soft DEVICE=C:\CARDSOFT\CARDID.EXE
Phoenix DEVICE=C:\PCMPLUS\PCMSCD.EXE

If one of these exist in your CONFIG.SYS, it can be used to enable
the PC Card. Follow the PCMCIA driver installation instructions in
the PC's manual.

If the PC Card drivers do not support multi-function cards, please
use the included enabler.

Disable all current PC Card drivers by editing the CONFIG.SYS
and AUTOEXEC.BAT. If it is necessary to keep these drivers
for other adapters skip to next section.
Insert Driver Disk in drive A:.
Type C: at the command prompt.
Type MD LMCARD to make a new directory.
Type COPY A:\ENABLER\*.* C:\LMCARD to copy the enabler to
your directory.
Modify the PATH= statement in your AUTOEXEC.BAT to include
path C:\LMCARD.
HelpDrivers Depuis Mars 2000