Conceptronic C100iM Télécharger Pilotes

Disponibles 1 fichiers pour C100iM
Conceptronic C100iM
Système d'exploitation
Windows 98-Me-2000-XP
Version Driver
Nom de fichier
10/100Mbps PCI Fast Ethernet Adapter
User's Manual


This equipment has been tested and found to comply with the limits
of a Class B computing devices, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.

If you suspect this product is causing interference, turn your computer
on and off while your radio or TV is showing interference. If the
interference disappears then when you turn the computer off and reappears
then you turn the computer on, something in the computer is causing

You can try to correct the interference by one or more of the following measures :

1. Reorient/Relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit difference from that
to which the receiver is connected.
4. Ensure that all expansion slots (on the back or side of the computer)
are covered. Also ensure that all metal retaining brackets are tightly
attached to the computer.
Chapter 1. Introduction
Thank you for purchasing our 10/100Mbps Fast Ethernet Adapter. This guide is
to provide the installation and usage of this adapter for network installers
and users. The 10/100 network adapter complies to PCI 2.1 and PCI 2.2 specification
and supports half/full- duplex feature which can double network speed.

This adapter supports both 10Mbps and 100Mbps network speed, 100BaseTX operates
on two pairs of category 5 UTP cable and 10BaseT operates on Category 3, 4, 5 UTP

With the Auto-Negotiation technology, network speed is auto detected. When you
connect the adapter to 10BaseT hub via UTP cable, the network speed becomes 10Mbps.
Similarly, if you connect the adapter to 100BaseTX hub, the network speed is 100Mbps.
If the hub is a switching hub which supports full-duplex function, then the speed
will be doubled to 20Mbps/200Mbps.

Real hassle free installation is achieved by conforming to PCI bus.
Just plug in the card and all setup is done automatically. No more software to run !
This adapter supplies many drivers including NetWare Server 3.x/4.x/5.x, NetWare ODI
for DOS, NDIS driver for Windows 95 OSR2/98/Me/NT/2000/XP, Packet Driver and Linux.
Whatever your requirements are ease of installation, superior performance or responsive
support backed up by unlimited technical support, this adapter is the superior choice.
HelpDrivers Depuis Mars 2000