Clevo M540SS Notebooks & Tablet PCs > Downloads Drivers and Manual

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M540SS

Description

Bison webcam Drivers

Operating System

Windows 7

Size Driver

9.7MB

File Name

bison_w7.zip

Observations

BisonC07Install-D(0906061730)-V(6.96.2728.01.1)-S()-C(Clevo)-CR
Date : 2009/06/06 17:30
Versiion : Vista/XP 32 (6.32.2728.01), Vista/XP 64 (6.64.2728.01)
note : Combine 3 driver for Win7 : S5K4AA+5607 & S5K4B1+5607 & S5K6AA+5608.
=============================================================================================
BisonC07Install-D(0906211639)-V(6.96.2728.02.1)-S()-C(Clevo)-CR
Date : 2009/06/21 16:39
Versiion : Vista/XP 32 (6.32.2728.02), Vista/XP 64 (6.64.2728.02)
note : Update inf settings to support more preview size.
Update BisonHK & system file to support Zoom function.
=============================================================================================
BisonC07Install-D(0906261441)-V(6.96.2728.02.2)-S()-C(Clevo)-CR
Date : 2009/06/26 14:41
Versiion : Vista/XP 32 (6.32.2728.02), Vista/XP 64 (6.64.2728.02)
note : Add support for 4CA+08 & 1330+07.
=============================================================================================
BisonC07Install-D(0907092153)-V(6.96.2728.03.1)-S()-C(Clevo)-CR
Date : 2009/07/09 21:53
Versiion : Vista/XP 32 (6.32.2728.03), Vista/XP 64 (6.64.2728.03)
note : Add the register in inf for C6 issue.
=============================================================================================
BisonC07Install-D(0907201524)-V(6.96.2728.03.2)-S()-C(Clevo)-CR
Date : 2009/07/20 15:24
Versiion : Vista/XP 32 (6.32.2728.03), Vista/XP 64 (6.64.2728.03)
note : Update 32bit pre-test system file of 4CA for cross noise & bad pixel issue.
Uninstall driver without reboot.
=============================================================================================
BisonC07Install-D(0907230003)-V(6.96.2728.03.3)-S()-C(Clevo)-CR
Date : 2009/07/23 00:03
Versiion : Vista/XP 32 (6.32.2728.03), Vista/XP 64 (6.64.2728.03)
note : Update 32bit pre-test system file of 4CA for cross noise & bad pixel issue.
Change shortcut behavior in the "Start Menu\Programs".
=============================================================================================
BisonC07Install-D(0907270953)-V(6.96.2728.04.1)-S()-C(Clevo)-CR-WHQL
Date : 2009/07/27 09:53
Versiion : Vista/XP 32 (6.32.2728.04), Vista/XP 64 (6.64.2728.04)
note : Update new driver with new link2008.
Disable TSR application before install driver for C6 issue.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M540SS

Description

GU702 WLAN Drivers

Operating System

Windows 7

Version

621174701

Size Driver

11.9MB

File Name

gu702_w7.zip

Observations

Date Version Note
===============+========+=============================================================================================
2006.07.18 1.018 1. Update OFDM parameter.
2. Update dynamic initial gain setting.
3. Update Rx descriptor definition.
4. Fix QoS info field of Tx packets in Ad-Hoc mode.
5. Use 24e to protect CAM configuration.
6. Fix a bug about contention window setting.
7. It's the first released beta version.

2006.07.21 1.019 1. "Init from HwParaFile": support partial modify option.

2006.07.26 1.021 1. Fix the bug about Rx stopping for defragmentation.
2. Fix roaming bug.
3. Review for CCX test plan v3.61, setion 4.7.4.1.

2006.07.26 1.022 1. Solve the "Out of RFD" issue.
2. Fix a bug which cause always roaming without indicate DISCONNECT
event up when AP is gone.
3. Change upper limit of off-serving channel measurement.
4. Fix a IO bug in setting HW_VAR_CCX_CHNL_LOAD.
5. Don't switch channel for Beacon Table request.
6. Add 8187B demo board MAC and AFE power saving parameters.

2006.08.10 1.023 1. Support WMM Power Save.

2006.08.11 1.024 1. Regular reision about HW parameters.

2006.08.11 1.025 1. Fix Win98SE driver initialzation issue.
2. Regular reision about HW parameters.

2006.08.21 1.026 1. Revise CCX Radio Measurement.
2. CKIP implemented.
3. Revise HW parameters for AFE power-saving and USB IF.

2006.08.23 1.027 1. Turn off AFE power-saving.
2. Revise CCX Radio Measurement.

2006.08.27 1.028 1. Revised for CCX Radio Measurement pre-test.

2006.09.04 1.029 1. Add PSP XLink support.

2006.09.05 1.031 1. Initialize Tx power index according to EEPROM.

2006.09.19 1.032 1. Implement CCX functions: Rouge AP, CCKM, Network EAP authentication.
2. Support CKIP under WMM.

2006.09.26 1.033 1. Regular revision on HW parameter.
2. Revise Aironet IE.

2006.09.28 1.034 1. Revise Tx AGC parameters.
2. Implement CCX S31 TPC.

2006.10.11 1.035 1. Add 87B OEM ID.
2. Fix tx out of order problem.
3. Implement 87B high power mechanism.
4. Revise bulk in/out behavior for XP SP1.

2006.10.30 1.036 1. Support Vista.

2006.11.03 1.037 1. Add Netgear VID/PID on Vista.

2006.11.07 1.038 1. Fix incorrect channel and frequency on Vista.
2. Fix OID_DOT11_RTS_THRESHOLD, OID_DOT11_RTS_THRESHOLD.
3. Add Vista X64.

2006.12.01 1.039 1. Revise power save state issue
2. Fix TX nested lock issuew hen unplug the device surprisely.
3. Fix driver loading issue.
4. Fix connecting to hidden AP issue
5. Fix plug/unplug caused scan fail.
6. Add RTS, Frag threshold, channel plan, wireless mode, preamble to property setting.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M540SS

Description

Audio Drivers

Operating System

Windows 7

Version

6.0.1.5898

Size Driver

36.3MB

File Name

audio_w7.zip

Observations

Driver Installation/Removal Procedure For Realtek High Definition Audio Codec:
=================================================================================
<<< For Windows 2000/XP/Vista/Windows7 x86/x64 Driver >>>
---------------------------------------
Setup Driver at first time:
---------------------------------------
Windows 2000 , XP :
Step 1. Before installing the Realtek High Definition Audio Driver, Press the
[Cancel] button if Windows detect the Multimedia Audio device.

Step 2. Run the setup.exe program to start the installation.

Step 3. Click on [Next] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.

Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.

Windows Vista, Windows7 :
Step 1. Run the setup.exe program to start the installation.

Step 2. Click on [Next] to continue the procedure. If the Windows popup
"Windows can't verify the publisher of this driver software" message,
press "Install this driver software anyway" to continue the installation.

Step 3. Finally, select to restart the system and press [Finish] to complete
the installation.
--------------------------
Update Driver:
--------------------------
Windows 2000 , XP :
Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.

Windows Vista, Windows7 :
Step 1. Run setup.exe, it will remove the original driver in your system.

Step 2. Click "Next" to remove the original audio driver in your system.

Step 3. Once after the original driver removed , reboot the computer.

Step 4. Please go back to the new driver package after computer restarted.

Step 5. Run setup.exe, it will install the new audio driver then.
--------------------------
Remove Driver:
--------------------------
Windows 2000 , XP :
Step 1. Go to Start\Settings\Control Panel.

Step 2. Select [Add or Remove Programs] icon.

Step 3. Select "Realtek High Definition Audio Driver" and press [Remove]
button.

Step 4. Click on [Yes] to finish the uninstallation.

Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.

Windows Vista, Windows7 :
Step 1. Go to Start\Settings\Control Panel.

Step 2. Select [Programs] icon.

Step 3. Select [Programs and Features] icon.

Step 4. Select "Realtek High Definition Audio Driver" and press [uninstall] button.

Step 5. Click on [Yes] to finish the uninstallation.

Step 6. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M540SS

Description

TouchPad Drivers

Operating System

Windows 7

Version

14.0.3.0

Size Driver

26.9MB

File Name

touchpad_w7.zip

Observations

Synaptics Pointing Device Driver Release Notes
Version 13.2.3
June 25, 2009
----------------------------------------------------------------------------
Overview
----------------------------------------------------------------------------
This document describes changes to the Synaptics TouchPad Driver
for Windows XP and Vista. Only external releases have been documented.
Other releases were for internal use, beta tests, or for specific customer
requests. These are not documented here.
----------------------------------------------------------------------------
Version 13.2.3 06/25/2009 (WinXP/Vista)
----------------------------------------------------------------------------
Bug Fixes
-Fixed lextra spaces before dots and dashes in Finish help.
-Added HelpID for demo ClickPad
-Added HelpText UI ClickZones with Middle Click
-Added HelpText UI ClickZones with Middle Click and Physical buttons
-Added settings for Show Video buttons and graphics for ClickPad 2.0 UI
-Added help text for clickpad 2.0
-Added one hot-key for button setting at OEM App.
-Fixed IDS_ENABLE stick hotkeys conflict issues.
-Added tap and double tap support for clickpad if one finger is rest in
the button zone, another finger does tap or double tap.
-Changed the default left and right buttons zone, and enabled tap and
double tap hack for clickpad.
-Set clickpad to true for 2 buttons clickpad.
-Make sure all HKLM are changed to HKR.
-We need to call IoSkipCurrentIrpStackLocation before calling
WdfDeviceWdmDispatchPreprocessedIrp if a new Irp is not created according
to specs., otherwise it causes a BSOD if verifier is enabled in 64-bit
Win7.
-Added more dependencies for Scroll item under pointer, Scroll selected
item, Enable reverse scrolling direction, and scrolling speed.
-Changed default settings.
-Added setting ControlBar1363 to demo in the trunk
-Excluded the ControlBar from showing up in our normal Mouse control panel
-1, Adjusted min amount of time the user will keep palm on the pad, before
triggering an action from 1000ms to 200ms. 2, Fixed PalmOnPad end action
was not fired because the stroke state was reset in secondary finger
packet. 3, Fixed PalmOnPad was not detected if there were 3 fingers
covering the TP.
-Updated for the SynSlidebar tester
-Converted old CPL tree to new CPL tree.
-Reorganized OEM inc files, and replaced all HKLM with HKR.
-Added document to describe adding new language support tasks
-updated configuration for PnP IDs
-Added branch for Gen3 demo.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M540SS

Description

Video Drivers

Operating System

Windows Vista 32/64 bits

Version

714105130

Size Driver

13.9MB

File Name

vga_v.zip

Observations

This document contains the following sections:

1. System Requirements
3. Installing the Software
4. Verifying Installation of the Software
5. Identifying the Software Version Number
6. Uninstalling the Software
7. Installation Switches Available

SYSTEM REQUIREMENTS
*******************

1. The system must contain one of the following Intel
Chipsets:

Intel(R) Poulsbo Chipset

2. The software should be installed on systems with at
least 512 MB of system memory.

3. There should be sufficient hard disk space in the
directory on the system in order to install
this software.

The drivers included with this distribution package are
designed to function with all releases of Microsoft
Windows* Vista.

INSTALLING THE SOFTWARE
*******************

General Installation Notes:

1. The operating system must be installed prior to the
installation of the driver.
2. This installation procedure is specific only to the
version of driver and installation file included in
this release.
3. This procedure assumes that all of the software
associated with this release is located in the same
directory.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M540SS

Description

LAN Drivers

Operating System

Windows Vista 32/64 bits

Version

2.0.1039.1650

Size Driver

4.9MB

File Name

lan_all.zip

Observations

SiS PCI Fast Ethernet Adapter Driver Setup Utility
for Windows 9X/ME/2000/XP Driver
==================================================

Note for using this Setup Utility
---------------------------------
For Windows 98/98SE/ME/2000/XP:
--------------------------------

Install the driver with "setup" or "setup -s" command:
1. setup: The Install shield will prompt you the steps to install
the driver.

2. setup -s: The Install shield will complete the installation
without prompting you any instruction.

--------------------
For Windows 95/OSR2:
--------------------

1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the PCI Ethernet Controller, you should
click "Next" until "Finish" is clicked without specifying location
of the driver. You will see the "PCI Ethernet Controller" in the
Device Manager.

2. Then you can install the driver with "setup" or "setup -s" command:
a) setup: The Install shield will prompt you the steps to install
the driver.

b) setup -s: The Install shield will complete the installation
without prompting you any instruction.

You need to reboot the system immediately after the Install shield
completes the installation.

3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.

4. After remove the driver, please restart the system immediately.

-----------------------
For Windows NT 3.5x/4.0
-----------------------
Do not use this utility in Windows NT 3.5x or 4.0.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M540SS

Description

TouchPad Drivers

Operating System

Windows Vista 32/64 bits

Version

10.0.12.0

Size Driver

24.1MB

File Name

touchpad_v.zip

Observations

Synaptics Pointing Device Driver Release Notes
Version 10.0.12
----------------------------------------------------------------------------
Overview
----------------------------------------------------------------------------
This document describes changes to the Synaptics TouchPad Driver
for Windows 9x & ME, Windows NT, Windows 2000, Windows XP and Vista.
Only external releases have been documented.
Other releases were for internal use, beta tests, or for specific
customer requests. These are not documented here.
----------------------------------------------------------------------------
Version 10.0.12 08/17/2007 (Win2K/WinXP/Vista)
----------------------------------------------------------------------------
Bug Fixes
-Fixed the parameter in SetCurrentDevice to be the device index, not the
device handle.
-Applied NavPoint features for OEM Pnp ID SYN0B0E.
-Check if Vista ahead of send WM_APP message.
-Changed to use WM_APP instead of WM_USER message.
-Chenged to use a different WM_APP message for mouse control.
-Removed a device (could be a real mouse) from the Pnp exclusion list.
-Added SYN0301 to an OEM customers INF file.
-Added an empty string check before we attempt to convert the path resource
ID to an integer for OSD settings. If the string is empty, we skip and
retrieve the next token.
-Changed 2 other implementations of the tokenize function to check for
empty strings.
-Fixed a bug where in Vista x64 SynTPStart could not bring up the
Enhancments application (SyntpEnh.exe).
-Added basic On Screen Button click code for OSD. At this stage we can
determine which object we have clicked on, but no action is being
performed yet.
-Added a new Pnp ID SYN1911 for an OEM customer.
-Added the "Disable internal pointing device when external USB pointing
device is attached" feature to the settings for OEM Pnp ID SYN0A0D.
-Added a new Pnp ID SYN014C for an OEM customer.
----------------------------------------------------------------------------
Version 10.0.11 08/10/2007 (Win2K/WinXP/Vista)
----------------------------------------------------------------------------
Bug Fixes
-Merged OSD branch into trunk.
-Fixed garbage characters in SynDiag LOG file in registry info.
-Fixed SynDiag log file in Japanese OS so it no longer gets garbage
chararacters for KTL log section.
-Added OEM PNP ID as per OEM request.
-Added USB touch panel devices to the exclusion list.
-Fixed a bug where we were sometimes unable to collect the daignostic
log file in Vista.
-Added OEM PNP ID as per OEM request.
-Added a new PnPID for an OEM customer.
-Add SYN1601 to an OEM customers INF file.
-Added a new USB HID to the exclusion list for an OEM customer.
-Added PNPID SYN0D05 to an OEM customers INF file.
-Fixed a bug in DoMouseActivate to get correct parameters.
-Added an OEM data file change and re-WHQL request.
-Added code to allow KBC disable feature to override API disable feature.
-Removed USB from NavPoint INF file settings.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M540SS

Description

802.11B+G WLAN Drivers

Operating System

Windows Vista 32/64 bits

Version

6.1147.0827.2008

Size Driver

14.5MB

File Name

gu702.zip

Observations

Date Version Note
===============+========+
2006.07.18 1.018 1. Update OFDM parameter.
2. Update dynamic initial gain setting.
3. Update Rx descriptor definition.
4. Fix QoS info field of Tx packets in Ad-Hoc mode.
5. Use 24e to protect CAM configuration.
6. Fix a bug about contention window setting.
7. It's the first released beta version.

2006.07.21 1.019 1. "Init from HwParaFile": support partial modify option.

2006.07.26 1.021 1. Fix the bug about Rx stopping for defragmentation.
2. Fix roaming bug.
3. Review for CCX test plan v3.61, setion 4.7.4.1.

2006.07.26 1.022 1. Solve the "Out of RFD" issue.
2. Fix a bug which cause always roaming without indicate DISCONNECT
event up when AP is gone.
3. Change upper limit of off-serving channel measurement.
4. Fix a IO bug in setting HW_VAR_CCX_CHNL_LOAD.
5. Don't switch channel for Beacon Table request.
6. Add 8187B demo board MAC and AFE power saving parameters.

2006.08.10 1.023 1. Support WMM Power Save.

2006.08.11 1.024 1. Regular reision about HW parameters.

2006.08.11 1.025 1. Fix Win98SE driver initialzation issue.
2. Regular reision about HW parameters.

2006.08.21 1.026 1. Revise CCX Radio Measurement.
2. CKIP implemented.
3. Revise HW parameters for AFE power-saving and USB IF.

2006.08.23 1.027 1. Turn off AFE power-saving.
2. Revise CCX Radio Measurement.

2006.08.27 1.028 1. Revised for CCX Radio Measurement pre-test.

2006.09.04 1.029 1. Add PSP XLink support.

2006.09.05 1.031 1. Initialize Tx power index according to EEPROM.

2006.09.19 1.032 1. Implement CCX functions: Rouge AP, CCKM, Network EAP authentication.
2. Support CKIP under WMM.

2006.09.26 1.033 1. Regular revision on HW parameter.
2. Revise Aironet IE.

2006.09.28 1.034 1. Revise Tx AGC parameters.
2. Implement CCX S31 TPC.

2006.10.11 1.035 1. Add 87B OEM ID.
2. Fix tx out of order problem.
3. Implement 87B high power mechanism.
4. Revise bulk in/out behavior for XP SP1.

2006.10.30 1.036 1. Support Vista.

2006.11.03 1.037 1. Add Netgear VID/PID on Vista.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M540SS

Description

Audio Drivers

Operating System

Windows Vista 32/64 bits

Version

6.0.1.5574

Size Driver

38.5MB

File Name

audio_all.zip

Observations

Avance Logic AC'97 Sound System Software ver: A2.60
Installation and Setup
Driver & Application Installation/Removal Procedure For Avance AC'97 Codec:
=================================================================================

<<< For Win98/Win2000/WinME (WDM driver) >>>

---------------------------------------
Setup Driver/Application at first time:
---------------------------------------

Step 1. Before installing the Avance AC'97 Drivers & Applications, Press the
[Cancel] button if Windows detect the PCI Multimedia Audio device.

Step 2. Insert the "Avance AC'97 Drivers & Applications" CD into the CD-ROM
drive and run the setup.exe program to finish the installation.

Step 3. Click on [Next/OK/Go] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.

Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.

The system will reload the drivers and do some adjustments in the INF
file if so required.

--------------------------
Update Driver/Application:
--------------------------

Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.

--------------------------
Remove Driver/Application:
--------------------------

Step 1. Go to Start\Settings\Control Panel.

Step 2. Select [Add/Remove Programs] icon.

Step 3. Select "Avance AC'97 Drivers and Applications" and press [Change/Remove]
button.

Step 4. Click on [Next/OK/Go] to finish the uninstallation.

Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.
<<< For WinNT 4.0 (NT4 driver) >>>

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M540SS

Description

Audio Drivers

Operating System

Windows XP

Version

5.10.0.5574

Size Driver

38.5MB

File Name

audio_all.zip

Observations

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M540SS

Description

802.11B+G WLAN Drivers

Operating System

Windows XP

Version

5.1158.304

Size Driver

14.5MB

File Name

gu702.zip

Observations

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M540SS

Description

TouchPad Drivers

Operating System

Windows XP

Version

10.0.12.0

Size Driver

24.1MB

File Name

touchpad.zip

Observations

Alps Pointing-device Driver provides a convenient way to modify
setting for Alps Pointing-device. The Alps Pointing-device Driver
is compatible with most standard mice and similar pointing devices.
____________________________________________________________

CONTENTS:

1. Driver Installation for Windows 2000/XP
2. Using the Alps Pointing-device Property Sheets
3. Files On the Setup Disk
____________________________________________________________

1. Driver Installation for Windows 2000/XP

Use this procedure if you use Windows 2000/XP:
1) From the Start menu, select Settings, Control Panel.
2) Double-click Mouse to open Mouse Properties.
3) Select the Hardware tab, and then click Properties.
4) Select the Driver tab, and then click Change.
5) Click Next.
6) Select Display a list of the known drivers for this
device so that I can choose a specific driver, and
then click Next.
7) Click Have Disk.
8) Click Browse.
9) Choose specific directory name that you have copied
driver files.
10) Click Apfiltr.inf, and then click Open.
11) Click OK.
12) Click Alps Pointing-device, and then click Next.
13) Click Next to copy the driver files to your system.
14) Click Finish.
15) Click Close.
16) Click Yes, then restart PC automatically.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M540SS

Description

LAN Drivers

Operating System

Windows XP

Version

2.0.1039.1110

Size Driver

4.9MB

File Name

lan_all.zip

Observations

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Mxxx Series

Model

Clevo M540SS

Description

Card reader Drivers 6.32.704.5

Operating System

Windows XP-Vista

Version

1.0.26.2

Size Driver

901KB

File Name

creader.zip

Observations

ENE MR510 / CB-712/714 Full Package Release Note
*************************************************
Version : 3.00.07
Date : 2007-07-09

OS :
Vista64, Vista, WinXP64, WinXP, Win2000, WinME, Win9X

Product :
MR510 / CB-712/714 Setup Shield
All OS : 2.00.02
CB714 Cardbus INF Update
Vista/64 : 3.00.01
WinXP/2k : 3.00.01
WinXP64 : 2.00.08
WinME/9x : 2.00.01
MR510 / CB-712/714 SecureDigital Card Reader Driver
Vista64 : 2.00.04
Vista : 2.00.02
WinXP/2k : 2.00.02
WinXP64 : 1.07.00
WinME/9x : 1.01.00
MR510 / CB-712/714 Memory Stick Card Reader Driver
Vista64 : 2.00.03
Vista : 2.00.02
WinXP/2k : 2.00.02
WinXP64 : 1.07.00
WinME/9x : 1.01.00
MR510 / CB-712/714 SmartMedia/XD Card Reader Driver
Vista/64 : 2.00.02
WinXP/2k : 2.00.02
WinXP64 : 1.07.00
WinME/9x : 1.01.00

WHQL Vista32/64 submission ID :
Cardbus INF : 1233857
SecureDigital : 1256082
Memory Stick : 1256073
SmartMedia/XD : 1241407

WHQL WinXP submission ID :
Cardbus INF : 1241409
SecureDigital : 1241409
Memory Stick : 1241409
SmartMedia/XD : 1241409

WHQL WinXP64 submission ID :
Cardbus INF : 1048034
SecureDigital : 1048034
Memory Stick : 1048034
SmartMedia/XD : 1048034
Product : ENE MR510 / CB-712/714 Setup Shield
*******************************************
OS:
Vista64, Vista, WinXP64, WinXP, Win2000, WinME, Win9X
===== Release note =====
Version : 2.00.04 (SD), 2.00.03 (MS)
Date : 2007-07-09
1. For Vista64 ,new DMA way to support when system memory upper 4G.
===== Release note =====
Version : 2.00.02
Date : 2007-03-01
1. Fix bug --- Fix Program Compatibility Assistant (PCA) warning dialog issue when User Account Control (UAC) is enable.

Access to Official Website Clevo

Home English Drivers English

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 30 files for Clevo M540SS

Select Files