Available 2 files for Diamond SupraExpress 56 Internal Speakerphone V.90 ACF2

Company

Diamond

Categories

Fax & Modem & ISDN

Model

Diamond SupraExpress 56 Internal Speakerphone V.90 ACF2

Description

Drivers

Operating System

Windows 2000

Size Driver

38KB

File Name

2000.zip

Observations

Windows 2000 drivers for SupraExpress 56e V.90 ACF2 modem, SUP2730

Instructions for new installation of drivers:

1) With the computer off, install the modem to the serial port on back of computer, plug power supply into wall and into back of modem.
2) Boot the system. Windows will not indicate that the modem was installed, but a "56K Data Fax Modem PnP" will be installed.
3) Go to Start > Settings > Control Panels. Double-click on System, click on the Hardware tab, and click on Device Manager.
4) Click on the + in front of Modems, right-click on the modem and go to Properties.
5) On the Driver tab, click Update Driver. The Update Device Driver Wizard will begin.
6) Choose to "Display a list of known drivers" as opposed to "Search for a suitable driver."
7) Point the procedure to the location on your hard drive or floppy disk where you extracted the drivers. You will need to click "Have Disk" and and type in the path to the drivers.
8) Pick the "SupraExpress 56e V.90 SUP2730" from the list. Windows will install drivers for this modem.

Testing the Installation:

1) Go to Start > Settings > Control Panels. Double-click on System, click on the Hardware tab, and click on Device Manager.
2) Click on the + in front of Modems, right-click on the modem and go to Properties.
3) On the Diagnostics tab, click the Query Modem button. After a few seconds, The ATI commands should contain information, including an ATI3 response of 3.210-03, the firmware revision for this modem.

Company

Diamond

Categories

Fax & Modem & ISDN

Model

Diamond SupraExpress 56 Internal Speakerphone V.90 ACF2

Description

Drivers

Operating System

Windows 95-98-98se-Me-NT4

Size Driver

205KB

File Name

95-98-98se-me-nt4.zip

Observations

SupraExpress 56 (non-USB) Series Windows 9x/NT INF files
======================================================================
Applicable files
-----------------
supraexpress_56-driver.exe

Release Notes
-----------------
These INF's are provided for those who might have lost their original
disks or received a modem before certain Microsoft functionality was
available. If your modem is working correctly with your system, there
is no reason to install new INF files.

Installation Instructions
-----------------
You should print this document for easy reference.

There are two possible paths for installing these files on your computer.
The first path is for those who have not installed any drivers for thier
modem. The second is for those who have already installed INF files for
their modem.

Installation Process 1:
-----------------

For those who have installed no INF files:

1. Label a blank formatted floppy disk, "SupraExpress 56 INF files."

2. Insert the disk into the floppy drive.

3. Download the file onto a floppy disk. In your browser, click on the
file name, supraexpress_56-driver.exe. Your browser should prompt as to
where you would like save the file. You should select the floppy drive, "a:\"
(without the quotes).

4. When the download is complete, you should disconnect from the internet
and close all open programs.

5. You should then need to extract the files from the downloaded file.
Click Start\Run\Browse. Locate the supraexpress_56-driver.exe file on the
floppy drive, "a:." Click OK and then OK again.

6. A Self-Extractor window should appear. "C:\WINDOWS\TEMP" should appear
in the Unzip To Folder window. This is the default location. You should change
this to "a:" (without the quotes). Click on the Unzip button.

7. After the files have been extracted click OK to the "success" window and
then Close to exit the extractor program.

At this point the files have been extracted and are ready for use to install.
You should be able to install your modem in the manner described in the
installation guide that accompanied the modem. When prompted for a driver disk,
use the disk you just created.

Installation Process 2:
-----------------

For those with previously installed INF files:

1. Download the file onto a floppy disk. In your browser, click on the
file name, supraexpress_56-driver.exe. Your browser should prompt as to
where you would like save the file. You should note the location (i.e. c:\windows\temp,
a:\, etc).

2. When the download is complete, you should disconnect from the internet and
close all open programs.