Available 6 files for LSI SANtricity 8.40 - 5.40

 

Select Files

Company

LSI

Categories

HD Controller & Removable drive

Model

LSI SANtricity 8.40 - 5.40

Description

Drivers

Operating System

Windows 2000

Version

1.09.03

Size Driver

91KB

File Name

540_w2k.zip

Observations

WIN2000.TXT

Installation Guide for the LSI Logic Fusion-MPT (TM) Driver:
SYMMPI.SYS V1.09.xx

This file describes the features and use of the LSI Logic Fusion-MPT
SCSI/Fibre Channel device drivers for the Windows 2000 operating system
environment. It is divided into the following sections:

Introduction for Windows 2000
Features
LSI Logic Devices Supported
Description

Installing the Driver(s)
New System Installation
CD-ROM Installation
Existing System Installation
Performance Tuning for Windows 2000
Large Block Size Support
Maximum Number of Concurrent I/Os
Miniport Driver Configuration Options
Troubleshooting
.........................................................................
1.0 Introduction for Windows 2000
Windows 2000 is an operating system designed to run on Intel-architecture
processors using current technology. It provides a graphical user interface
environment incorporating many high-level features. Refer to the Microsoft
Windows 2000 documentation for details.

An I/O manager handles I/O requests in Windows 2000. To address a SCSI
peripheral, the I/O manager goes through the appropriate drivers. Windows 2000
provides class drivers for hard disk, optical, CD-ROM, printer, and scanner
peripherals. Other class drivers, provided by peripheral manufacturers, may be
added to support new devices. Tape device support is built into the operating
system itself and does not require a class driver.

Microsoft provides the port driver and LSI Logic provides the miniport driver,
called SYMMPI.SYS. This driver completes the path to the LSI Logic controller
or processor with an optional SCSI or Fibre Channel BIOS.

LSI Logic uses the same filenames for their drivers for different Windows
operating systems. The driver files are packaged either in separate
subdirectories based on the Windows operating system or on different disks.
To determine the driver file for Windows 2000, note that the filename ends
with .SYS. For example, this driver is SYMMPI.SYS.

To determine the operating system version, go into Windows Explorer, display
the driver file, right click on the filename, click on Properties, and click
on the Version tab. Finally, click on the Internal Filename in the lower
section. For Windows 2000, the filename appears as filename (Win2K).

The next sections describe these drivers and their installation.

.........................................................................
1.1 Features

The SYMMPI.SYS miniport driver supports these features:

o Supports 320 Mbytes/s parallel SCSI transfers (for LSI453C1020
and LSI53C1030)
o Supports Integrated Mirroring (TM) technology (for LSI453C1020
and LSI53C1030)
o Supports PCI and PCI-X bus protocols (for LSI53C1020 and LSI53C1030)
o Supports 2Gbaud Fibre Channel transfers (for LSIFC929, LSIFC919 LSIFC929X, and LSIFC919X)
o Supports LSI Logic MPT common software interface
o Supports multiple host adapters
o Supports multiple Logical Unit Numbers (LUNs)

Company

LSI

Categories

HD Controller & Removable drive

Model

LSI SANtricity 8.40 - 5.40

Description

Drivers

Operating System

Windows 2000

Version

1.20.06

Size Driver

126KB

File Name

v610_win2k.zip

Observations

WIN2000.TXT

Installation Guide for the LSI Logic Fusion-MPT (TM) Driver:
SYMMPI.SYS V1.20.06

This file describes the features and use of the LSI Logic Fusion-MPT
SCSI/Fibre Channel/SAS (Serial Attached SCSI) device drivers for the
Windows 2000 operating system environment. It is divided into the
following sections:

Introduction for Windows 2000
Features
LSI Logic Devices Supported
Description

Installing the Driver(s)
New System Installation
CD-ROM Installation
Existing System Installation
Performance Tuning for Windows 2000
Large Block Size Support
Maximum Number of Concurrent I/Os
Miniport Driver Configuration Options
Troubleshooting
.........................................................................
1.0 Introduction for Windows 2000
Windows 2000 is an operating system designed to run on Intel-architecture
processors using current technology. It provides a graphical user interface
environment incorporating many high-level features. Refer to the Microsoft
Windows 2000 documentation for details.

An I/O manager handles I/O requests in Windows 2000. To address a SCSI
peripheral, the I/O manager goes through the appropriate drivers. Windows 2000
provides class drivers for hard disk, optical, CD-ROM, printer, and scanner
peripherals. Other class drivers, provided by peripheral manufacturers, may be
added to support new devices. Tape device support is built into the operating
system itself and does not require a class driver.

Microsoft provides the port driver and LSI Logic provides the miniport driver,
called SYMMPI.SYS. This driver completes the path to the LSI Logic controller
or processor with an optional SCSI, Fibre Channel, or SAS BIOS.

LSI Logic uses the same filenames for their drivers for different Windows
operating systems. The driver files are packaged either in separate
subdirectories based on the Windows operating system or on different disks.
To determine the driver file for Windows 2000, note that the filename ends
with .SYS. For example, this driver is SYMMPI.SYS.

To determine the operating system version, go into Windows Explorer, display
the driver file, right click on the filename, click on Properties, and click
on the Version tab. Finally, click on the Internal Filename in the lower
section. For Windows 2000, the filename appears as filename (Win2K).

The next sections describe these drivers and their installation.

.........................................................................
1.1 Features

The SYMMPI.SYS miniport driver supports these features:

o Supports 320 Mbytes/s parallel SCSI transfers (for LSI53C1020
and LSI53C1030)
o Supports Integrated Mirroring (TM) technology (for LSI53C1020
and LSI53C1030)
o Supports PCI and PCI-X bus protocols
o Supports 1GB and 2GB Fibre Channel transfers (for LSIFC929X, LSIFC929,
LSIFC919X, and LSIFC919)
o Supports 1.5GB and 3GB SAS expanders/devices and SATA devices

Company

LSI

Categories

HD Controller & Removable drive

Model

LSI SANtricity 8.40 - 5.40

Description

Drivers

Operating System

Windows NT4

Version

1.08.12

Size Driver

39KB

File Name

540_nt40.zip

Observations

LSI Logic Corporation - Symbios PCI SCSI MPI Miniport Driver (NT 4.0)

To install the Symbios PCI SCSI MPI miniport driver do the following:

1) Ensure the following files are on a flex disk located at:
\txtsetup.oem
\symmpi.sys
\symmpi.tag
\oemsetup.inf
2) Boot NT.
3) From the Start Bar go to 'Settings' select Control Panel.
4) Double-click on SCSI Adapters.
5) Select the Drivers tab.
6) Click on Add.
7) Click on Have Disk.
8) Insert flex with driver (above) into system.
9) Enter a:\nt Click on Ok
10) Click on Ok List should show:
Symbios PCI SCSI MPI MiniPort Driver
11) Enter a:\nt Click on Continue
12) Remove flex from system.
13) Select the Yes option to allow NT to reboot and load the new driver.

Company

LSI

Categories

HD Controller & Removable drive

Model

LSI SANtricity 8.40 - 5.40

Description

Drivers

Operating System

Windows Server 2003 (32 bit)

Version

1.09.03

Size Driver

94KB

File Name

540_w2k3srv_32.zip

Observations

SYMMPI2003.TXT

Installation Guide for the LSI Logic Fusion-MPT (TM) Driver:
SYMMPI.SYS V1.09.xx

This file describes the features and use of the LSI Logic Fusion-MPT
SCSI/Fibre Channel device drivers for the Windows Server 2003 operating
system environment. It is divided into the following sections:

Introduction for Windows Server 2003
Features
LSI Logic Devices Supported
Description

Installing the Driver(s)
New System Installation
CD-ROM Installation
Existing System Installation
Performance Tuning for Windows Server 2003
Large Block Size Support
Maximum Number of Concurrent I/Os
Miniport Driver Configuration Options
Troubleshooting
.........................................................................
1.0 Introduction for Windows Server 2003
Windows Server 2003 is an operating system designed to run on Intel
architecture (32-bit) and Itanium Processor Family (64-bit) processors using
current technology. It provides a graphical user interface environment
incorporating many high-level features. Refer to the Microsoft Windows Server
2003 documentation for details.

An I/O manager handles I/O requests in Windows Server 2003. To address a SCSI
peripheral, the I/O manager goes through the appropriate drivers. Windows
Server 2003 provides class drivers for hard disk, optical, CD-ROM, printer,
and scanner peripherals. Other class drivers, provided by peripheral
manufacturers, may be added to support new devices. Tape device support is
built into the operating system itself and does not require a class driver.

Microsoft provides the port driver and LSI Logic provides the miniport driver,
which is called SYMMPI.SYS. This driver completes the path to the LSI Logic
controller or processor with an optional SCSI or Fibre Channel BIOS.

LSI Logic uses the same filenames for their drivers for different Windows
operating systems. The driver files are packaged either in separate
subdirectories based on the Windows operating system or on different disks.
To determine the driver file for Windows Server 2003, note that the filename
ends with .SYS. For example, this driver is SYMMPI.SYS.

To determine the operating system version, go into Windows Explorer, display
the driver file, right click on the filename, click on Properties, and click
on the Version tab. Click on the Internal Filename in the lower section.
For Windows Server 2003, the filename appears as filename (Server 2003 32-bit)
for 32-bit systems and filename (Server 2003 64-bit) for 64-bit systems.
The next sections describe these drivers and their installation.

.........................................................................
1.1 Features

The SYMMPI.SYS miniport driver supports these features:

o Supports 320 Mbytes/s parallel SCSI transfers (for LSI453C1020
and LSI53C1030)
o Supports Integrated Mirroring (TM) technology (for LSI453C1020
and LSI53C1030)
o Supports PCI and PCI-X bus protocols (for LSI53C1020 and LSI53C1030)
o Supports 2Gbaud Fibre Channel transfers (for LSIFC929X, LSIFC929, LSIFC919X, and LSIFC919)
o Supports LSI Logic MPT common software interface
o Supports multiple host adapters

Company

LSI

Categories

HD Controller & Removable drive

Model

LSI SANtricity 8.40 - 5.40

Description

Drivers

Operating System

Windows Server 2003 (32 bit)

Version

1.20.06

Size Driver

390KB

File Name

v610_srv_2003.zip

Observations

SYMMPI2003.TXT

Installation Guide for the LSI Logic Fusion-MPT (TM) Driver:
SYMMPI.SYS V1.20.06

This file describes the features and use of the LSI Logic Fusion-MPT
SCSI/Fibre Channel/SAS (Serial Attached SCSI) device drivers for the
Windows Server 2003 operating system environment. It is divided into
the following sections:

Introduction for Windows Server 2003
Features
LSI Logic Devices Supported
Description

Installing the Driver(s)
New System Installation
CD-ROM Installation
Existing System Installation
Performance Tuning for Windows Server 2003
Large Block Size Support
Maximum Number of Concurrent I/Os
Miniport Driver Configuration Options
Troubleshooting
.........................................................................
1.0 Introduction for Windows Server 2003
Windows Server 2003 is an operating system designed to run on Intel
architecture (i386), Itanium Processor Family (IA64), and Extended 64
(AMD64/EM64T) processors using current technology. It provides a graphical
user interface environment incorporating many high-level features. Refer to
the Microsoft Windows Server 2003 documentation for details.

An I/O manager handles I/O requests in Windows Server 2003. To address a SCSI
peripheral, the I/O manager goes through the appropriate drivers. Windows
Server 2003 provides class drivers for hard disk, optical, CD-ROM, printer,
and scanner peripherals. Other class drivers, provided by peripheral
manufacturers, may be added to support new devices. Tape device support is
built into the operating system itself and does not require a class driver.

Microsoft provides the port driver and LSI Logic provides the miniport driver,
which is called SYMMPI.SYS. This driver completes the path to the LSI Logic
controller or processor with an optional SCSI, Fibre Channel, or SAS BIOS.

LSI Logic uses the same filenames for their drivers for different Windows
operating systems. The driver files are packaged either in separate
subdirectories based on the Windows operating system or on different disks.
To determine the driver file for Windows Server 2003, note that the filename
ends with .SYS. For example, this driver is SYMMPI.SYS.

To determine the operating system version, go into Windows Explorer, display
the driver file, right click on the filename, click on Properties, and click
on the Version tab. Click on the Internal Filename in the lower section.
The filename appears as filename (Server 2003 ), where platform is
i386, IA64, or AMD64. The next sections describe these drivers and their
installation.

.........................................................................
1.1 Features

The SYMMPI.SYS miniport driver supports these features:

o Supports 320 Mbytes/s parallel SCSI transfers (for LSI453C1020
and LSI53C1030)
o Supports Integrated Mirroring (TM) technology (for LSI453C1020
and LSI53C1030)
o Supports PCI and PCI-X bus protocols
o Supports 1GB and 2GB Fibre Channel transfers (for LSIFC929X, LSIFC929,
LSIFC919X, and LSIFC919)

Company

LSI

Categories

HD Controller & Removable drive

Model

LSI SANtricity 8.40 - 5.40

Description

Drivers

Operating System

Windows Server 2003 (64 bit)

Version

1.09.03

Size Driver

130KB

File Name

540_w2k3srv_64.zip

Observations

SYMMPI2003.TXT

Installation Guide for the LSI Logic Fusion-MPT (TM) Driver:
SYMMPI.SYS V1.09.xx

This file describes the features and use of the LSI Logic Fusion-MPT
SCSI/Fibre Channel device drivers for the Windows Server 2003 operating
system environment. It is divided into the following sections:

Introduction for Windows Server 2003
Features
LSI Logic Devices Supported
Description

Installing the Driver(s)
New System Installation
CD-ROM Installation
Existing System Installation
Performance Tuning for Windows Server 2003
Large Block Size Support
Maximum Number of Concurrent I/Os
Miniport Driver Configuration Options
Troubleshooting
.........................................................................
1.0 Introduction for Windows Server 2003
Windows Server 2003 is an operating system designed to run on Intel
architecture (32-bit) and Itanium Processor Family (64-bit) processors using
current technology. It provides a graphical user interface environment
incorporating many high-level features. Refer to the Microsoft Windows Server
2003 documentation for details.

An I/O manager handles I/O requests in Windows Server 2003. To address a SCSI
peripheral, the I/O manager goes through the appropriate drivers. Windows
Server 2003 provides class drivers for hard disk, optical, CD-ROM, printer,
and scanner peripherals. Other class drivers, provided by peripheral
manufacturers, may be added to support new devices. Tape device support is
built into the operating system itself and does not require a class driver.

Microsoft provides the port driver and LSI Logic provides the miniport driver,
which is called SYMMPI.SYS. This driver completes the path to the LSI Logic
controller or processor with an optional SCSI or Fibre Channel BIOS.

LSI Logic uses the same filenames for their drivers for different Windows
operating systems. The driver files are packaged either in separate
subdirectories based on the Windows operating system or on different disks.
To determine the driver file for Windows Server 2003, note that the filename
ends with .SYS. For example, this driver is SYMMPI.SYS.

To determine the operating system version, go into Windows Explorer, display
the driver file, right click on the filename, click on Properties, and click
on the Version tab. Click on the Internal Filename in the lower section.
For Windows Server 2003, the filename appears as filename (Server 2003 32-bit)
for 32-bit systems and filename (Server 2003 64-bit) for 64-bit systems.
The next sections describe these drivers and their installation.

.........................................................................
1.1 Features

The SYMMPI.SYS miniport driver supports these features:

o Supports 320 Mbytes/s parallel SCSI transfers (for LSI453C1020
and LSI53C1030)
o Supports Integrated Mirroring (TM) technology (for LSI453C1020
and LSI53C1030)
o Supports PCI and PCI-X bus protocols (for LSI53C1020 and LSI53C1030)
o Supports 2Gbaud Fibre Channel transfers (for LSIFC929X, LSIFC929, LSIFC919X, and LSIFC919)
o Supports LSI Logic MPT common software interface
o Supports multiple host adapters

Access to Official Website LSI

Home English Drivers English

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.