Digital Audio CardDeluxe Legacy MMe Télécharger Pilotes

This directory contains the CardDeluxe(TM) driver for Windows 2000 and XP.

*** Installation instructions ***

New Installation (no CardDeluxe driver previously installed)
-Shut down the computer, install the CardDeluxe hardware (see the installation guide for detailed instructions), and boot the computer.
-The Hardware Wizard will launch. Insert the installation disk now.
-Check "Install the software automatically" & click "Next"
-Windows will warn that using the CardDeluxe Analog + Digital Audio driver may impair the system, click "Continue Anyway" (It will be OK!)
-Click Finish
-Restart your computer

Update Driver Installation (Earlier version of CardDeluxe NT driver already installed)
-Go to Control Panel->System->Hardware->Device Manager->Sound, video & game controllers. Right Click on CardDeluxe Analog + Digital Audio, and select "Update Driver"
-The Hardware Wizard will launch. If installing from a floppy disk, insert the disk now
-Click the selection, "Install from a list or a specific location (Advanced)" & Click "Next"
-Click the selection, "Search for the best driver in these locations:"
-Click the selection, "include this location in the search:" and Browse to the location of the new drivers (floppy or folder on disk) & Click "Next"
-Windows will warn that using the CardDeluxe Analog + Digital Audio driver may impair the system, Click "Continue Anyway" (It will be OK!)
-Click Finish
-Restart your computer

*** Release notes ***

Known issues: (feel free to report any others to Support)

1) This Driver is NOT ACPI compliant and will not allow the computer to enter into "sleep" mode.

2) This driver will still be reported as "Not digitally signed". (Driver tab
in Device Manager).

3) The Resource tab in Device Manager will report that the installed device
driver does not support Plug and Play. This reporting discrepency will be
eliminated with the WDM driver.

4) The installation process may hang if the CardDlxConfig.exe program is loaded. Check your system tray for the icon, and if you see it, hit Right Click->Exit on the system tray icon before re-installing the driver.

===================================================================================

CardDeluxe(TM) Windows 2000 and XP Driver Version History

Version 4.06.1037 (2002-02-22) (Windows 2000 and XP only)
1. Initial release of plug and play driver for Windows 2000 and XP.
2. Add CardDlxConfig.exe program and automatic installation on taskbar
for easier access to the configuration dialog.
3. Update help file.
Note: this driver requires firmware version 1.04.0008 or later.

CardDeluxe(TM)
24 bit/96kHz Ultra High Fidelity
Audio Interface for the Computer

QuickStart and Installation Guide Addendum (2001-02-14)

This addendum covers changes and updates not available at the time the
manual was printed.
The following drivers are available for the CardDeluxe:
* Multimedia (wave) and DirectSound drivers for Windows 95/98:
available in root directory of driver disk
* Multimedia (wave) driver for Windows NT 4.0:
available in \WinNT directory of driver disk
(see \WinNT\ReadMe.txt for more information)
* ASIO driver for Windows 95/98/NT:
available in \ASIO directory of driver disk
(see \ASIO\ReadMe.txt for more information)

=======================================================

CardDeluxe(TM) Driver Version History

Version 4.05.1037 (2001-02-14):
1. Disable pre-emphasis in consumer non-audio mode to match spec.
2. Add driver debugging options.
3. Update help file to reflect new area code and address.
4. Queue callbacks to ensure they are not called reentrantly in NT driver.
5. Allow smaller ASIO/EASI buffer sizes.
6. Cosmetic changes in configuration pages.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1036 (2000-02-22):
1. Properly recover from driver thread startup/shutdown failure.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1035 (2000-02-21):
1. Ensure driver thread starts before returning from open.
2. Allow user to forcibly close driver.
3. Add debugging messages to driver.
Note: this driver requires firmware version 1.04.0008 or later.

Version 4.05.1034 (1999-12-28):
1. Allow up to 16 cards to be installed on a system.
Note: this driver requires firmware version 1.04.0008 or later.