Genius Voodoo2 Pro Télécharger Pilotes

Requirements
------------

- Windows 95 or Windows 98
- PC with a Pentium II, Pentium Pro, Pentium or similar processor
- One free PCI slot (or two free PCI slots for SLI)
- 16MB of RAM or more Suggested
Installation
------------
The installation below can vary depending on which version of Windows
is installed. To determine the Windows 95 version click Start,
Settings, Control Panel. Double-click on the system icon. If the
Windows version is 4.00.950b, Windows 95 OEM SR2 is running.
Existing Drivers Installed or PCI Multimedia Device shown in Device Mgr
-----------------------------------------------------------------------
1) Start Windows and extract the drivers to a temporary directory.

2) Open Device Manager (Start, Settings, Control Panel, System)

3) Locate the existing reference to the card it will be listed as:

Reference Card: Other Devices / PCI Multimedia Device or
Sound, Video, Game Controllers / Voodoo2

NOTE: In an SLI configiration (2 Voodoo2 cards) you only need to
select one card to update.

4) Double Click on the card, then click the driver Tab

Windows 95 Standard Release users: Click "Change Driver" and choose
"Have Disk"
Windows 95 OEM SR2 users: Click "Update Driver" then click
the Next Button. Click "Other
Locations"
Windows 98 users: Click "Update Driver" then click
the Next Button twice on the
Detection Dialog Box. Ensure that
"Specify a Location" is checked and
"Microsoft Windows Update" is not
checked. Click Browse to continue.

5) Point the driver location to where the files are extracted to and click
OK.

Windows Standard Release 95 users: Select "Voodoo2 3D Accelerator"
from the List and click OK.
Click OK again to save changes in
Device Manager.
Windows 95 OEM SR2 Users: Click on Finish to continue.
Windows 98 users: Click on Next to continue.

6) You MAY then be prompted to insert the "Voodoo2 Drivers for Windows 9X"
Disk. Again, point to the path you extracted the files to and press OK.

7) Windows will copy the drivers. Reboot the system when prompted

8) Install DirectX 5.0 or higher. (If not already installed)

No Current Drivers Installed (Single Board and SLI)
---------------------------------------------------

Single Board
============

1) Start Windows and extract the drivers to a temporary directory.

2) Shutdown Windows, Power off the system and install your Voodoo2

Requirements
------------

- Windows NT 4.0 or later
- PC with a Pentium II, Pentium Pro, Pentium or similar processor
- One free PCI slot (or two free PCI slots for SLI)
Installation
------------

The setup program must be run under Windows NT to install the Windows
NT drivers and 3Dfx device services. The account used during install
must have administrator permissions.

1) Run the self-extracting executable to begin setup.
2) Follow the on screen prompts.
3) After installation you may need to reboot the system.
Troubleshooting Voodoo2
-------------------------------

####

Q: I have an S3 968/868 video card, why does my system lock
up when I run a Glide or Direct3D title.

A: S3 968 and 868 chipsets may misreport the mapped memory used.
There is a chance that your Voodoo2 card will be assigned by
Plug and Play a memory range that is used by the S3 card, but
not reported. The Voodoo2 card can be relocated by:

Windows NT Users: An NT service called NTREMAP is
installed when Glide is added to an NT system.
NTREMAP can change the memory address of a Voodoo2
board and prevent a conflict with an S3 card.

To use NTREMAP, add the following registry values to:
\HKLM\Software\3Dfx Interactive\NTRemap

Value Name Type Value
---------- ---- -----
EnableNTRemap DWORD 1 (HEX)
ForceAddress DWORD 12000000 (HEX)

The Force Address setting will vary, in this example
0x12000000 is used. This is normally free on most
systems.

NOTE: If you use an address that over-writes another
device, Windows NT may not boot. If such a problem
occurs, power off the system and remove your Voodoo2.
Alter the registry to use a different memory range
(or remove the ForceAddress setting). Then Reinstall
the Voodoo2 card into your system.