Available 18 files for Comtrol RocketPort Serial Hub Si 4-8

 

Select Files

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol RocketPort Serial Hub Si 4-8

Description

Device Driver

Operating System

Citrix WinFrame 1.6

Version

6.04

Size Driver

796KB

File Name

1800031i.exe

Observations

Do NOT install this driver in Windows 2000/XP operating systems. RocketPort NS-Link Device Driver
for the Windows NT(R) operating system
=================================================================
PRODUCTS SUPPORTED BY NS-LINK

The following products are supported by this device driver:

- DeviceMaster RTS series
- RocketPort Serial Hub ia
- RocketPort Serial Hub Si series
=================================================================
WHERE TO LOCATE SOFTWARE DOCUMENTATION

Use the Comtrol CD shipped with your product or download the latest
Software Installation and Configuration Guide from one of the
following locations (same document regardless of path):

- ftp://ftp.comtrol.com/Dev_Mstr/RTS/Drivers/WinNT/SW_Doc
- ftp://ftp.comtrol.com/RPSH_ia/Drivers/WinNT/SW_Doc
- ftp://ftp.comtrol.com/RPSH_Si/Drivers/WinNT/SW_Doc

Optionally, you can use the search engine at
http://support.comtrol.com/download.asp to search for documentation.

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol RocketPort Serial Hub Si 4-8

Description

Device Driver

Operating System

Citrix WinFrame 1.7

Version

6.04

Size Driver

796KB

File Name

1800031i.exe

Observations

Do NOT install this driver in Windows 2000/XP operating systems. RocketPort NS-Link Device Driver
for the Windows NT(R) operating system
=================================================================
PRODUCTS SUPPORTED BY NS-LINK

The following products are supported by this device driver:

- DeviceMaster RTS series
- RocketPort Serial Hub ia
- RocketPort Serial Hub Si series
=================================================================
WHERE TO LOCATE SOFTWARE DOCUMENTATION

Use the Comtrol CD shipped with your product or download the latest
Software Installation and Configuration Guide from one of the
following locations (same document regardless of path):

- ftp://ftp.comtrol.com/Dev_Mstr/RTS/Drivers/WinNT/SW_Doc
- ftp://ftp.comtrol.com/RPSH_ia/Drivers/WinNT/SW_Doc
- ftp://ftp.comtrol.com/RPSH_Si/Drivers/WinNT/SW_Doc

Optionally, you can use the search engine at
http://support.comtrol.com/download.asp to search for documentation.

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol RocketPort Serial Hub Si 4-8

Description

Diagnostic/IP Configurator

Operating System

Diagnostic

Version

1.01

Size Driver

107KB

File Name

1800032b.exe

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol RocketPort Serial Hub Si 4-8

Description

Device Driver

Operating System

Linux

Version

3.02

Size Driver

552KB

File Name

1800026g.tgz

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol RocketPort Serial Hub Si 4-8

Description

Device Driver

Operating System

Linux

Version

3.05

Size Driver

506KB

File Name

1800026h.tgz

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol RocketPort Serial Hub Si 4-8

Description

NS-Link User Guide

Information

Manual PDF for Windows XP

Operating System

Manual

Version

A

Size Driver

5MB

File Name

ns-link_user.pdf

Observations

Table of Contents
Introduction.........................................................................................................................................5
Installation Overview.................................................................................................................................. 5
NS-Link Driver Overview........................................................................................................................... 5
NS-Link Requirements .................................................................................................................................................5
IP or MAC Addressing Issues.......................................................................................................................................6
NS-Link Features..........................................................................................................................................................6
Using the Port Sharing Feature...................................................................................................................................6
Connectivity Requirements ..........................................................................................................................................7
Locating DeviceMaster Documentation................................................................................................... 8
Locating DeviceMaster Software............................................................................................................... 8
Verifying the DeviceMaster is Ready for NS-Link................................................................................. 8
Initial NS-Link Installation.............................................................................................................11
Windows 7..................................................................................................................................................... 11
Windows Server 2008 and Windows Vista ............................................................................................. 12
Windows XP and Windows Server 2003.................................................................................................. 13
Updating, Adding, or Removing DeviceMasters ........................................................................15
Updating an Existing Driver..................................................................................................................... 15
Windows Vista, Windows Server 2008, and Windows 7 ............................................................................................15
Windows XP and Windows Server 2003 .....................................................................................................................15
Adding Additional DeviceMasters........................................................................................................... 16
Removing an Existing Driver ................................................................................................................... 16
NS-Link Configuration .....................................................................................................................17
Associating the MAC Address................................................................................................................... 18
Programming the IP Address ................................................................................................................... 19
Disabling DHCP Requests (MAC Mode) ................................................................................................. 22
Retrieving IP Address Information from the DeviceMaster............................................................. 24
Changing Device Properties ..................................................................................................................... 24
Configuring DeviceMaster Ports as Sockets......................................................................................... 25
Configuring Advanced COM Port Properties .............................................................................27
Troubleshooting and Technical Support .....................................................................................31
How to Find Diagnostic Tools and Utilities .......................................................................................... 31
Troubleshooting Checklist ........................................................................................................................ 32
General Troubleshooting.......................................................................................................................... 33
Using the Advisor ....................................................................................................................................... 34
NS-Link Driver Troubleshooting ............................................................................................................. 35

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol RocketPort Serial Hub Si 4-8

Description

Hardware Installation

Information

Manual PDF

Operating System

Manual

Version

C

Size Driver

244KB

File Name

2000058.pdf

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol RocketPort Serial Hub Si 4-8

Description

Software Installation

Information

Manual PDF for Windows 98

Operating System

Manual

Version

A

Size Driver

800KB

File Name

2000066a.pdf

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol RocketPort Serial Hub Si 4-8

Description

Device Driver

Operating System

Windows 2000

Version

6.10

Size Driver

836KB

File Name

1800198b.exe

Observations

NSLink (TM) driver for the Microsoft Windows(TM) 2000 and XP Operating Systems.

This driver is designed exclusively for the Windows 2000 and
Windows XP Operating Systems, and is not intended for use with
any other Microsoft operating system.

This readme.txt file provides basic instructions for installing the
NSLink software for the DeviceMaster RTS. For more detailed
instructions, see the installation documentation which came with
the device. Additional information is also available after the
installation is complete by selecting help in the setup program.
You can view the help information before installation by running
WINHELP sisetup.hlp. At the time of this release, the information
in the help file was modeled on the NSLink Windows 2000 installation.
The Help file information is generally applicable to the Windows XP
installation as well, but some details and screen shots may differ
slightly from those described for Windows 2000.
==================================================
Windows 2000 Software Installation (See below for XP installation)

Right click on the My Computer Icon and select Properties from
the menu. Select the Hardware Page tab, then press the Hardware
Wizard button. In the Hardware Wizard screens, select Next and
then the Add/Troubleshoot a device, and run the Add a new device
Wizard. Select "No, I want to select hardware from a list", then
select "Multiport serial adapters" as the type of hardware to
install. Press the "Have Disk" button, point the installation to
the install disk or downloaded directory with the NSLink driver
and the NETCTMSI.INF install script file. A list with the various
NSLink device's should appear. Select the device type (DeviceMaster,
Si, IA) with the number of ports which matches the device you are
Installing. Allow the wizard to copy the files and perform the
installation.

NOTE: Wait until all ports have been installed for the device
before clicking on the Finish installation button for the device.
Also, if a Finish Installation appears for any of the ports, click
on finish and select 'no' to the 'reboot the computer' display until
all ports have been installed. Otherwise, the COM assignments to the
ports for the device being installed will not be in ascending order.

Exit the Hardware Wizard, and from the same Hardware tab Page,
select the Device Manager button. If you are running any legacy
WindowsNT drivers in your system, then click on the "+" sign in
front of the group of hardware devices labeled "Ports (COM & LPT)".
Check that all COM assignments (i.e. COM3) in the parenthesis for
each port are unique. If there are any conflicts, note them.

Now, click on the "+" sign in front of the group of hardware devices
labeled "Multiport serial adapters". Then, double click on the
serial adapter device you just installed, this will bring up the
property sheets for that device.

Select the "Main Setup" tab, select the device you have just
installed, and click on the Properties button. Click on the box
in front of MAC, and change the address field to match the MAC
Address on the label found on your NSLink device. Make sure that
the Number of Ports entry matches the total number of ports found
on the device you installed.

If this device had conflicting COM assignments, you can now resolve
them by selecting the port on the "Main Setup" tab and clicking
on the Properties button. Now go to the Com Name field and select
a different COM name, which is unique from those seen in the
"Ports (COM & LPT)" list.

Select to close the NSLink property sheet. It should
ask if you would like to install NS utility programs. Respond
with a YES

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol RocketPort Serial Hub Si 4-8

Description

Device Driver

Operating System

Windows 2000

Version

6.10.4

Size Driver

838KB

File Name

1800198c.exe

Observations

NSLink (TM) driver for the Microsoft Windows(TM) 2000 and XP Operating Systems.

This driver is designed exclusively for the Windows 2000 and
Windows XP Operating Systems, and is not intended for use with
any other Microsoft operating system.

This readme.txt file provides basic instructions for installing the
NSLink software for the DeviceMaster RTS. For more detailed
instructions, see the installation documentation which came with
the device. Additional information is also available after the
installation is complete by selecting help in the setup program.
You can view the help information before installation by running
WINHELP sisetup.hlp. At the time of this release, the information
in the help file was modeled on the NSLink Windows 2000 installation.
The Help file information is generally applicable to the Windows XP
installation as well, but some details and screen shots may differ
slightly from those described for Windows 2000.
==================================================
Windows 2000 Software Installation (See below for XP installation)

Right click on the My Computer Icon and select Properties from
the menu. Select the Hardware Page tab, then press the Hardware
Wizard button. In the Hardware Wizard screens, select Next and
then the Add/Troubleshoot a device, and run the Add a new device
Wizard. Select "No, I want to select hardware from a list", then
select "Multiport serial adapters" as the type of hardware to
install. Press the "Have Disk" button, point the installation to
the install disk or downloaded directory with the NSLink driver
and the NETCTMSI.INF install script file. A list with the various
NSLink device's should appear. Select the device type (DeviceMaster,
Si, IA) with the number of ports which matches the device you are
Installing. Allow the wizard to copy the files and perform the
installation.

NOTE: Wait until all ports have been installed for the device
before clicking on the Finish installation button for the device.
Also, if a Finish Installation appears for any of the ports, click
on finish and select 'no' to the 'reboot the computer' display until
all ports have been installed. Otherwise, the COM assignments to the
ports for the device being installed will not be in ascending order.

Exit the Hardware Wizard, and from the same Hardware tab Page,
select the Device Manager button. If you are running any legacy
WindowsNT drivers in your system, then click on the "+" sign in
front of the group of hardware devices labeled "Ports (COM & LPT)".
Check that all COM assignments (i.e. COM3) in the parenthesis for
each port are unique. If there are any conflicts, note them.

Now, click on the "+" sign in front of the group of hardware devices
labeled "Multiport serial adapters". Then, double click on the
serial adapter device you just installed, this will bring up the
property sheets for that device.

Select the "Main Setup" tab, select the device you have just
installed, and click on the Properties button. Click on the box
in front of MAC, and change the address field to match the MAC
Address on the label found on your NSLink device. Make sure that
the Number of Ports entry matches the total number of ports found
on the device you installed.

If this device had conflicting COM assignments, you can now resolve
them by selecting the port on the "Main Setup" tab and clicking
on the Properties button. Now go to the Com Name field and select
a different COM name, which is unique from those seen in the
"Ports (COM & LPT)" list.

Select to close the NSLink property sheet. It should
ask if you would like to install NS utility programs. Respond
with a YES.

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol RocketPort Serial Hub Si 4-8

Description

Device Driver

Operating System

Windows 2000

Version

6.10.8

Size Driver

829KB

File Name

1800198e.exe

Observations

NSLink (TM) driver for the Microsoft Windows(TM) 2000 and XP Operating Systems.

This driver is designed exclusively for the Windows 2000 and
Windows XP Operating Systems, and is not intended for use with
any other Microsoft operating system.

This readme.txt file provides basic instructions for installing the
NSLink software for the DeviceMaster RTS. For more detailed
instructions, see the installation documentation which came with
the device. Additional information is also available after the
installation is complete by selecting help in the setup program.
You can view the help information before installation by running
WINHELP sisetup.hlp. At the time of this release, the information
in the help file was modeled on the NSLink Windows 2000 installation.
The Help file information is generally applicable to the Windows XP
installation as well, but some details and screen shots may differ
slightly from those described for Windows 2000.
==================================================
Windows 2000 Software Installation (See below for XP installation)

Right click on the My Computer Icon and select Properties from
the menu. Select the Hardware Page tab, then press the Hardware
Wizard button. In the Hardware Wizard screens, select Next and
then the Add/Troubleshoot a device, and run the Add a new device
Wizard. Select "No, I want to select hardware from a list", then
select "Multiport serial adapters" as the type of hardware to
install. Press the "Have Disk" button, point the installation to
the install disk or downloaded directory with the NSLink driver
and the NETCTMSI.INF install script file. A list with the various
NSLink device's should appear. Select the device type (DeviceMaster,
Si, IA) with the number of ports which matches the device you are
Installing. Allow the wizard to copy the files and perform the
installation.

NOTE: Wait until all ports have been installed for the device
before clicking on the Finish installation button for the device.
Also, if a Finish Installation appears for any of the ports, click
on finish and select 'no' to the 'reboot the computer' display until
all ports have been installed. Otherwise, the COM assignments to the
ports for the device being installed will not be in ascending order.

Exit the Hardware Wizard, and from the same Hardware tab Page,
select the Device Manager button. If you are running any legacy
WindowsNT drivers in your system, then click on the "+" sign in
front of the group of hardware devices labeled "Ports (COM & LPT)".
Check that all COM assignments (i.e. COM3) in the parenthesis for
each port are unique. If there are any conflicts, note them.

Now, click on the "+" sign in front of the group of hardware devices
labeled "Multiport serial adapters". Then, double click on the
serial adapter device you just installed, this will bring up the
property sheets for that device.

Select the "Main Setup" tab, select the device you have just
installed, and click on the Properties button. Click on the box
in front of MAC, and change the address field to match the MAC
Address on the label found on your NSLink device. Make sure that
the Number of Ports entry matches the total number of ports found
on the device you installed.

If this device had conflicting COM assignments, you can now resolve
them by selecting the port on the "Main Setup" tab and clicking
on the Properties button. Now go to the Com Name field and select
a different COM name, which is unique from those seen in the
"Ports (COM & LPT)" list.

Select to close the NSLink property sheet. It should
ask if you would like to install NS utility programs. Respond
with a YES.

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol RocketPort Serial Hub Si 4-8

Description

Device Driver

Operating System

Windows 95

Version

1.02

Size Driver

274KB

File Name

1800033a.exe

Observations

RocketPort Serial Hub Si Series Device Driver
for the Windows 95/98 operating system
=================================================================
SCOPE AND LIMITS

You can use this file or the Software Installation and Configuration
documentation to install the Comtrol RPSH-Si software for the following
products:

- RocketPort Serial Hub Si 4-port
- RocketPort Serial Hub Si 8-port

This software does NOT support the RocketPort Serial Hub or the VS1000.

This readme file covers:

- Prerequisites
- Removing existing RPSH-Si software
- RPSH-Si installation
- Installation troubleshooting
- Known software capabilities and limitations
- Technical Support contact information

RocketPort Serial Hub Si Users:
For hardware installation or modem, printer installation and
configuration, see the Installation and Configuration Guide for
your product.

This product was developed and tested under Microsoft Windows 95/98.

=================================================================
PREREQUISITES

This file assumes that you have already installed the Windows 95/98
operating system and that you have a basic understanding of
Windows 95/98 operation.
=================================================================
REMOVING EXISTING RPSH-Si SOFTWARE

Comtrol recommends removing older versions of the RPSH-Si software
before installing new releases.

1. Select 'Settings' from the start menu to open the Control Panel.

2. Open the Devices Manager by clicking on the System icon in the
Control Panel and selecting the Device Manager tab.

3. Expand the 'Multi-function adapters' node of the device tree.

4. Select, one by one, all Comtrol RPSH Si devices and click the
'Remove' button for each device

5. Go back to the Control Panel window and double-click the
'Add/Remove Programs' icon.

6. Select 'Comtrol RPSH Si Tools' in the list box available on the
"Install/Uninstall" tab and click the "Add/Remove..." button.

7. Delete the Rpshsi directory and all files it contains. The RPSHSI
directory is located in the Windows System directory
(usually C:\WINDOWS\SYSTEM)

8. Delete any OEM inf files containing ctmrphsi.inf on the first line of the
file. OEM inf files are located in the Windows INF directory (usually
C:\WINDOWS\INF). Note that, depending on the Windows version, there may
not be any OEM files containing ctmrphsi.

9. Restart the computer so that your changes take effect

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol RocketPort Serial Hub Si 4-8

Description

Device Driver

Operating System

Windows 98

Version

1.02

Size Driver

274KB

File Name

1800033a.exe

Observations

RocketPort Serial Hub Si Series Device Driver
for the Windows 95/98 operating system
=================================================================
SCOPE AND LIMITS

You can use this file or the Software Installation and Configuration
documentation to install the Comtrol RPSH-Si software for the following
products:

- RocketPort Serial Hub Si 4-port
- RocketPort Serial Hub Si 8-port

This software does NOT support the RocketPort Serial Hub or the VS1000.

This readme file covers:

- Prerequisites
- Removing existing RPSH-Si software
- RPSH-Si installation
- Installation troubleshooting
- Known software capabilities and limitations
- Technical Support contact information

RocketPort Serial Hub Si Users:
For hardware installation or modem, printer installation and
configuration, see the Installation and Configuration Guide for
your product.

This product was developed and tested under Microsoft Windows 95/98.

=================================================================
PREREQUISITES

This file assumes that you have already installed the Windows 95/98
operating system and that you have a basic understanding of
Windows 95/98 operation.
=================================================================
REMOVING EXISTING RPSH-Si SOFTWARE

Comtrol recommends removing older versions of the RPSH-Si software
before installing new releases.

1. Select 'Settings' from the start menu to open the Control Panel.

2. Open the Devices Manager by clicking on the System icon in the
Control Panel and selecting the Device Manager tab.

3. Expand the 'Multi-function adapters' node of the device tree.

4. Select, one by one, all Comtrol RPSH Si devices and click the
'Remove' button for each device

5. Go back to the Control Panel window and double-click the
'Add/Remove Programs' icon.

6. Select 'Comtrol RPSH Si Tools' in the list box available on the
"Install/Uninstall" tab and click the "Add/Remove..." button.

7. Delete the Rpshsi directory and all files it contains. The RPSHSI
directory is located in the Windows System directory
(usually C:\WINDOWS\SYSTEM)

8. Delete any OEM inf files containing ctmrphsi.inf on the first line of the
file. OEM inf files are located in the Windows INF directory (usually
C:\WINDOWS\INF). Note that, depending on the Windows version, there may
not be any OEM files containing ctmrphsi.

9. Restart the computer so that your changes take effect

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol RocketPort Serial Hub Si 4-8

Description

Device Driver

Operating System

Windows NT 3.51

Version

6.04

Size Driver

796KB

File Name

1800031i.exe

Observations

Do NOT install this driver in Windows 2000/XP operating systems. RocketPort NS-Link Device Driver
for the Windows NT(R) operating system
=================================================================
PRODUCTS SUPPORTED BY NS-LINK

The following products are supported by this device driver:

- DeviceMaster RTS series
- RocketPort Serial Hub ia
- RocketPort Serial Hub Si series
=================================================================
WHERE TO LOCATE SOFTWARE DOCUMENTATION

Use the Comtrol CD shipped with your product or download the latest
Software Installation and Configuration Guide from one of the
following locations (same document regardless of path):

- ftp://ftp.comtrol.com/Dev_Mstr/RTS/Drivers/WinNT/SW_Doc
- ftp://ftp.comtrol.com/RPSH_ia/Drivers/WinNT/SW_Doc
- ftp://ftp.comtrol.com/RPSH_Si/Drivers/WinNT/SW_Doc

Optionally, you can use the search engine at
http://support.comtrol.com/download.asp to search for documentation.

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol RocketPort Serial Hub Si 4-8

Description

Device Driver

Operating System

Windows NT4

Version

6.04

Size Driver

796KB

File Name

1800031i.exe

Observations

Do NOT install this driver in Windows 2000/XP operating systems. RocketPort NS-Link Device Driver
for the Windows NT(R) operating system
=================================================================
PRODUCTS SUPPORTED BY NS-LINK

The following products are supported by this device driver:

- DeviceMaster RTS series
- RocketPort Serial Hub ia
- RocketPort Serial Hub Si series
=================================================================
WHERE TO LOCATE SOFTWARE DOCUMENTATION

Use the Comtrol CD shipped with your product or download the latest
Software Installation and Configuration Guide from one of the
following locations (same document regardless of path):

- ftp://ftp.comtrol.com/Dev_Mstr/RTS/Drivers/WinNT/SW_Doc
- ftp://ftp.comtrol.com/RPSH_ia/Drivers/WinNT/SW_Doc
- ftp://ftp.comtrol.com/RPSH_Si/Drivers/WinNT/SW_Doc

Optionally, you can use the search engine at
http://support.comtrol.com/download.asp to search for documentation.

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol RocketPort Serial Hub Si 4-8

Description

Device Driver

Operating System

Windows XP

Version

6.10.8

Size Driver

829KB

File Name

1800198e.exe

Observations

NSLink (TM) driver for the Microsoft Windows(TM) 2000 and XP Operating Systems.

This driver is designed exclusively for the Windows 2000 and
Windows XP Operating Systems, and is not intended for use with
any other Microsoft operating system.

This readme.txt file provides basic instructions for installing the
NSLink software for the DeviceMaster RTS. For more detailed
instructions, see the installation documentation which came with
the device. Additional information is also available after the
installation is complete by selecting help in the setup program.
You can view the help information before installation by running
WINHELP sisetup.hlp. At the time of this release, the information
in the help file was modeled on the NSLink Windows 2000 installation.
The Help file information is generally applicable to the Windows XP
installation as well, but some details and screen shots may differ
slightly from those described for Windows 2000.
==================================================
Windows 2000 Software Installation (See below for XP installation)

Right click on the My Computer Icon and select Properties from
the menu. Select the Hardware Page tab, then press the Hardware
Wizard button. In the Hardware Wizard screens, select Next and
then the Add/Troubleshoot a device, and run the Add a new device
Wizard. Select "No, I want to select hardware from a list", then
select "Multiport serial adapters" as the type of hardware to
install. Press the "Have Disk" button, point the installation to
the install disk or downloaded directory with the NSLink driver
and the NETCTMSI.INF install script file. A list with the various
NSLink device's should appear. Select the device type (DeviceMaster,
Si, IA) with the number of ports which matches the device you are
Installing. Allow the wizard to copy the files and perform the
installation.

NOTE: Wait until all ports have been installed for the device
before clicking on the Finish installation button for the device.
Also, if a Finish Installation appears for any of the ports, click
on finish and select 'no' to the 'reboot the computer' display until
all ports have been installed. Otherwise, the COM assignments to the
ports for the device being installed will not be in ascending order.

Exit the Hardware Wizard, and from the same Hardware tab Page,
select the Device Manager button. If you are running any legacy
WindowsNT drivers in your system, then click on the "+" sign in
front of the group of hardware devices labeled "Ports (COM & LPT)".
Check that all COM assignments (i.e. COM3) in the parenthesis for
each port are unique. If there are any conflicts, note them.

Now, click on the "+" sign in front of the group of hardware devices
labeled "Multiport serial adapters". Then, double click on the
serial adapter device you just installed, this will bring up the
property sheets for that device.

Select the "Main Setup" tab, select the device you have just
installed, and click on the Properties button. Click on the box
in front of MAC, and change the address field to match the MAC
Address on the label found on your NSLink device. Make sure that
the Number of Ports entry matches the total number of ports found
on the device you installed.

If this device had conflicting COM assignments, you can now resolve
them by selecting the port on the "Main Setup" tab and clicking
on the Properties button. Now go to the Com Name field and select
a different COM name, which is unique from those seen in the
"Ports (COM & LPT)" list.

Select to close the NSLink property sheet. It should
ask if you would like to install NS utility programs. Respond
with a YES.

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol RocketPort Serial Hub Si 4-8

Description

Device Driver

Operating System

Windows XP

Version

6.10

Size Driver

836KB

File Name

1800198b.exe

Observations

NSLink (TM) driver for the Microsoft Windows(TM) 2000 and XP Operating Systems.

This driver is designed exclusively for the Windows 2000 and
Windows XP Operating Systems, and is not intended for use with
any other Microsoft operating system.

This readme.txt file provides basic instructions for installing the
NSLink software for the DeviceMaster RTS. For more detailed
instructions, see the installation documentation which came with
the device. Additional information is also available after the
installation is complete by selecting help in the setup program.
You can view the help information before installation by running
WINHELP sisetup.hlp. At the time of this release, the information
in the help file was modeled on the NSLink Windows 2000 installation.
The Help file information is generally applicable to the Windows XP
installation as well, but some details and screen shots may differ
slightly from those described for Windows 2000.
==================================================
Windows 2000 Software Installation (See below for XP installation)

Right click on the My Computer Icon and select Properties from
the menu. Select the Hardware Page tab, then press the Hardware
Wizard button. In the Hardware Wizard screens, select Next and
then the Add/Troubleshoot a device, and run the Add a new device
Wizard. Select "No, I want to select hardware from a list", then
select "Multiport serial adapters" as the type of hardware to
install. Press the "Have Disk" button, point the installation to
the install disk or downloaded directory with the NSLink driver
and the NETCTMSI.INF install script file. A list with the various
NSLink device's should appear. Select the device type (DeviceMaster,
Si, IA) with the number of ports which matches the device you are
Installing. Allow the wizard to copy the files and perform the
installation.

NOTE: Wait until all ports have been installed for the device
before clicking on the Finish installation button for the device.
Also, if a Finish Installation appears for any of the ports, click
on finish and select 'no' to the 'reboot the computer' display until
all ports have been installed. Otherwise, the COM assignments to the
ports for the device being installed will not be in ascending order.

Exit the Hardware Wizard, and from the same Hardware tab Page,
select the Device Manager button. If you are running any legacy
WindowsNT drivers in your system, then click on the "+" sign in
front of the group of hardware devices labeled "Ports (COM & LPT)".
Check that all COM assignments (i.e. COM3) in the parenthesis for
each port are unique. If there are any conflicts, note them.

Now, click on the "+" sign in front of the group of hardware devices
labeled "Multiport serial adapters". Then, double click on the
serial adapter device you just installed, this will bring up the
property sheets for that device.

Select the "Main Setup" tab, select the device you have just
installed, and click on the Properties button. Click on the box
in front of MAC, and change the address field to match the MAC
Address on the label found on your NSLink device. Make sure that
the Number of Ports entry matches the total number of ports found
on the device you installed.

If this device had conflicting COM assignments, you can now resolve
them by selecting the port on the "Main Setup" tab and clicking
on the Properties button. Now go to the Com Name field and select
a different COM name, which is unique from those seen in the
"Ports (COM & LPT)" list.

Select to close the NSLink property sheet. It should
ask if you would like to install NS utility programs. Respond
with a YES

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol RocketPort Serial Hub Si 4-8

Description

Device Driver

Operating System

Windows XP

Version

6.10.4

Size Driver

838KB

File Name

1800198c.exe

Observations

NSLink (TM) driver for the Microsoft Windows(TM) 2000 and XP Operating Systems.

This driver is designed exclusively for the Windows 2000 and
Windows XP Operating Systems, and is not intended for use with
any other Microsoft operating system.

This readme.txt file provides basic instructions for installing the
NSLink software for the DeviceMaster RTS. For more detailed
instructions, see the installation documentation which came with
the device. Additional information is also available after the
installation is complete by selecting help in the setup program.
You can view the help information before installation by running
WINHELP sisetup.hlp. At the time of this release, the information
in the help file was modeled on the NSLink Windows 2000 installation.
The Help file information is generally applicable to the Windows XP
installation as well, but some details and screen shots may differ
slightly from those described for Windows 2000.
==================================================
Windows 2000 Software Installation (See below for XP installation)

Right click on the My Computer Icon and select Properties from
the menu. Select the Hardware Page tab, then press the Hardware
Wizard button. In the Hardware Wizard screens, select Next and
then the Add/Troubleshoot a device, and run the Add a new device
Wizard. Select "No, I want to select hardware from a list", then
select "Multiport serial adapters" as the type of hardware to
install. Press the "Have Disk" button, point the installation to
the install disk or downloaded directory with the NSLink driver
and the NETCTMSI.INF install script file. A list with the various
NSLink device's should appear. Select the device type (DeviceMaster,
Si, IA) with the number of ports which matches the device you are
Installing. Allow the wizard to copy the files and perform the
installation.

NOTE: Wait until all ports have been installed for the device
before clicking on the Finish installation button for the device.
Also, if a Finish Installation appears for any of the ports, click
on finish and select 'no' to the 'reboot the computer' display until
all ports have been installed. Otherwise, the COM assignments to the
ports for the device being installed will not be in ascending order.

Exit the Hardware Wizard, and from the same Hardware tab Page,
select the Device Manager button. If you are running any legacy
WindowsNT drivers in your system, then click on the "+" sign in
front of the group of hardware devices labeled "Ports (COM & LPT)".
Check that all COM assignments (i.e. COM3) in the parenthesis for
each port are unique. If there are any conflicts, note them.

Now, click on the "+" sign in front of the group of hardware devices
labeled "Multiport serial adapters". Then, double click on the
serial adapter device you just installed, this will bring up the
property sheets for that device.

Select the "Main Setup" tab, select the device you have just
installed, and click on the Properties button. Click on the box
in front of MAC, and change the address field to match the MAC
Address on the label found on your NSLink device. Make sure that
the Number of Ports entry matches the total number of ports found
on the device you installed.

If this device had conflicting COM assignments, you can now resolve
them by selecting the port on the "Main Setup" tab and clicking
on the Properties button. Now go to the Com Name field and select
a different COM name, which is unique from those seen in the
"Ports (COM & LPT)" list.

Select to close the NSLink property sheet. It should
ask if you would like to install NS utility programs. Respond
with a YES.

Access to Official Website Comtrol

Home English Drivers English

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.