Clevo 960 Notebooks & Tablet PCs

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 9xxx Series

Model

Clevo 960

Description

CD-ROM Drivers

Operating System

20X

Size Driver

70KB

File Name

cdrom208.exe

Observations

This manual describes how to setup the device driver of TOSHIBA ATAPI CD-ROM
Drive.
This device driver is exclusive use of TOSHIBA ATAPI CD-ROM drive XM-5602B,
XM-5702B, XM-6002B and XM-1502B, XM-2402B.
How to setup the CD-ROM device driver.

1. It copies CD-ROM device driver to the system disk.

2. Add the following line to CONFIG.SYS of the system disk.
LASTDRIVE=Z
DEVICE=:\CDROMDRV.SYS

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 9xxx Series

Model

Clevo 960

Description

PCMCIA Drivers

Operating System

MS-DOS-Windows 3.1

Size Driver

1MB

File Name

96pcmdos.zip

Observations

SystemSoft's CardWizard(TM)
Version 5.3
The Intelligent PCMCIA Configuration Utility
______________________________________________
===============
README Contents
===============

CardWizard Requirements
CardWizard Installation
Instructions
CONFIG.SYS Menu Partitions
Notes About Your CardWizard Software
Flash Support Update
CardWizard Release Notes
Note on Advanced Power Management (CS_APM.EXE)
Note on LAN Cards
Note on Token Ring Cards
Note on Docking Stations
Sony CD-Rom
Madge Token Ring
Ositech Trump Card
SMC Ethernote Card
Xircom Token Ring

===========================
CardWizard Requirements
===========================

The following items are the minimum requirements for CardWizard:

Windows 3.1 or Windows for Workgroups 3.11
DOS 5.0 or later
1 or more PC Card slots
32KB of DOS memory
4MB RAM
2MB of hard drive storage space

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 9xxx Series

Model

Clevo 960

Description

Audio Drivers

Operating System

MS-DOS-Windows 3.1

Size Driver

2.3MB

File Name

96audos.zip

Observations

YAMAHA OPL3-SAx installation program
*******************************
1. Introduction
---------------
The installation program will automatically detect whether it is Windows 3.1
or Windows 95, and will proceed with the appropriate installation.

----------------------------------
2. Software that will be installed
----------------------------------
For Windows 3.1
1.OPL3-SAx device driver
2.Application program (YSTATION)
3.DOS setup utility (SETUPSA)

For Windows 95
1.Application program (YSTATION)
2.DOS setup utility (SETUPSA)

-------------------------
3. Installation procedure
-------------------------
1.In Windows, start up "SETUP.EXE" which is located in the "Disk1".
The installation program will automatically detect whether you have
Windows 3.1 or Windows 95, and will proceed with the installation.
2.Proceed with installation as directed by the wizard.
3.In some cases, restarting the computer after installation may cause the
OPL3-SAx setting window (SETUPSA) to appear. If this occurs, press the [ENTER]
key. If there are no problems with the settings, SETUPSA will exit, and you can
start up Windows. If there are problems with the settings, an error message will
appear. The appropriate actions to take for each error message and the procedure
for using SETUPSA are explained in the SAREADME.TXT file that was registered
in the Yamaha group, so refer to this file and make the appropriate settings.

----------------------
4. Uninstall procedure
----------------------
For Windows 3.1
1.In the "YAMAHA group" of the "Program manager" double-click the
"OPL3-SAx uninstall"icon.
2.When you restart the computer, the condition previous to installation will
be restored.

For Windows 95
1.Click "Start", and then point to "Programs".
2.In the "YAMAHA group" click the "OPL3-SAx uninstall" icon.
3.Proceed with uninstallation as directed by the wizard.
4.When you restart the computer, the condition previous to installation will
be restored.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 9xxx Series

Model

Clevo 960

Description

Audio Drivers

Operating System

OS/2 V3,V4

Size Driver

91KB

File Name

96audos2.exe

Observations

YAMAHA* AUDIO HARDWARE DEVICE DRIVERS FOR USE WITH OS/2*

--------------------
1.0 REVISION HISTORY
--------------------
July 23, 1996: Version 1.0
January 20, 1997: Version 3.02
March 21, 1997:Version 3.03

----------------
2.0 INTRODUCTION
----------------
This file contains last-minute updates. Please read this file before
proceeding with the installation.

Supported OS and Hardware:
OS : OS2 Warp* Version 3 and Version 4
Hardware: OPL3-SA, OPL3-SA2, OPL3-SA3, OPL4-ML(Hardware Wavetable)

-----------------------------
3.0 INSTALLATION INSTRUCTIONS
-----------------------------
Installing the Yamaha Device Driver for OS/2 Warp Version 3:

1) When installing OS/2 be sure to install the Multimedia Applications.
2) Be sure that your BIOS settings are set to NOT use a PnP OS if
using Warp 3.0.
3) OS/2 will autodetect the Yamaha device as a Sound Blaster* Pro.
Do NOT install this device and remove it from the setup. The
Yamaha driver will be installed as part of the Multimedia
Application Install.
4) Open the Multimedia Folder located on the Desktop.
5) Within the Multimedia Folder open the Multimedia Application
Install Icon.
6) Insert the Driver Diskette and change the source drive to read from
the diskette.
7) Highlight and select the Yamaha OPL3-SA Series Driver and then
click Install.
8) OS/2 will then prompt you that the CONFIG.SYS will be changed,
select YES.
9) Enter 1 for the number of Yamaha OPL3-SA Series Audio devices
and click OK.
10) Set your resource configuration to match your system.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 9xxx Series

Model

Clevo 960

Description

Video Drivers

Operating System

OS/2 Wrap 3.0

Size Driver

1.2MB

File Name

96vgaos2.exe

Observations

OS/2 Video Device Driver for Chips And Technologies
65550 Flat Panel/CRT Graphics Accelerator

1.0 Compatibility
-----------------
This driver is designed to function with OS/2 Version 2.11 and OS/2 3.0 Warp
operating systems.

2.0 Hardware
------------
These drivers support Chips And Technologies 65550 Flat Panel/CRT
graphics accelerator adapters in a PCI Bus configuration.

3.0 Supported Features
----------------------
This graphics accelerator driver is designed to function as a 32-bit
Presentation Manager graphics display driver under the OS/2 32 bit graphics
engine, and provides Seamless Windows 3.1 support.

This display driver also supports setting the CRT screen refresh rate using
the System-Settings notebook in the OS/2 System Setup folder.

3.1 Supported Resolutions
-------------------------
Supported resolutions are provided based on availablity in Video BIOS. Not all
systems have all resolutions provided, and may be display mode ( LCD/Simul/CRT )
dependent.

8 Bit/Pixel 640x480x256, 800x600x256, 1024x768x256
16 Bit/Pixel 640x480x64K, 800x600x64K, 1024x768x64K
24 Bit/Pixel 640x480x16M

4.0 Driver Installation
-----------------------

4.1 Preliminary Steps
---------------------
The following steps must be performed before you install the 65550/554
display driver:

1. OS/2 DOS Support must be installed.

2. If you previously installed SVGA support, you must reset the system
to VGA mode. VGA is the default video mode enabled when OS/2 is installed.
To restore VGA mode, use Selective Install and select VGA for Primary
Display. For more information on this procedure, see the section on
Changing Display Adapter Support in the OS/2 Users Guide.

4.2 Installing from Diskette
----------------------------
To install this driver, do the following steps:

1. Open an OS/2 full screen or windowed session.

2. Place the 65550 PCI Display Driver Diskette in drive A.

3. At the OS/2 command prompt, type the following commands to
copy the files to the OS/2 drive:

Type A: to make this the default drive.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 9xxx Series

Model

Clevo 960

Description

Video Drivers

Operating System

Windows 95

Size Driver

96KB

File Name

96vgaw95.exe

Observations

This file describes normal display driver installation procedures for
Windows 95. Use these procedures when installing the display drivers
provided in this directory.

DRIVER INSTALLATION PROCEDURE

Click Start, then Settings, then Control Panel.

Start the "Display" applet program.

Select the "Settings" page, push the "Change Display Type" button.

Push the "Change" button in the "Adapter Type" area.

Push the "Have Disk" button and press "OK".

Specify the path to the new driver and press the
key:

Example 1: Insert the drivers disk in the A: floppy drive,
and enter A:\.

Example 2: Type in the name of the directory where you copied
the drivers, either on your local hard drive or
on a network share.

Example 3: If you're not sure exactly where the drivers are,
choose the "Browse..." button are find them.

The "Select Device" dialog box will appear. Select the adapter that
corresponds to the one you installed in your machine and click OK.

Windows 95 will copy the display drivers to the proper directories
on your system.

Continue choosing Close until asked to restart your machine from the
"Systems Settings Change" dialog box.

After the system has restarted, you can go back into the Display
applet and select alternate screen resolutions and color depths.

This file describes normal display driver installation procedures for
Windows OSR2. Use these procedures when installing the display drivers
provided in this directory.

DRIVER INSTALLATION PROCEDURE

Click Start, then Settings, then Control Panel.

Start the "Display" applet program.

Select the "Settings" page, push the "Advanced Properties" button.

Push the "Change" button in the "Adapter" area.

Push the "Have Disk" button and press "OK".

Specify the path to the new driver and press the
key:

Example 1: Insert the drivers disk in the A: floppy drive,
and enter A:\.

Example 2: Type in the name of the directory where you copied
the drivers, either on your local hard drive or
on a network share.

Example 3: If you're not sure exactly where the drivers are,
choose the "Browse..." button are find them.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 9xxx Series

Model

Clevo 960

Description

Video Drivers

Operating System

Windows 95

Version

V2.2.4

Size Driver

331KB

File Name

96v224.exe

Observations

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 9xxx Series

Model

Clevo 960

Description

PCMCIA Drivers

Operating System

Windows 95

Size Driver

1.5MB

File Name

96pcw95.exe

Observations

SystemSoft's CardWorks(TM)
The Complete PC CARD Solution for Windows 95
Version: 5.3
_____________________________________________
Contents
--------
Product Description
Copyright Notices
Tips for Using Real Mode Device Drivers
Novell Network Drivers for LAN Cards
CardID Settings for CardWorks
Overriding CardSoft Driver Installation
Advantages to Loading CardWizard at Startup
Using Copy and Paste with CardWizard
Installing CardWorks with a Docking Station
Uninstalling CardWorks
Initializing PC Card Hard Disks (or ATAs)
Limitations
Known Issues
Product Description
-------------------
CardWorks is a Windows 95 software suite that includes
SystemSoft's industry leading CardSoft & CardWizard PC CARD
software to enhance the functionality of PC CARD technology
in Windows 95. CardWorks is intended to make PC CARD use easy
and pleasurable, while affording the greatest compatibility in
the computer industry.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 9xxx Series

Model

Clevo 960

Description

Video Drivers

Operating System

Windows NT4

Size Driver

236KB

File Name

96vnt4.exe

Observations

Chips and Technologies, Inc.
Display Driver Package
Release Notes for Windows NT 4.00

Revision: 1.0.5
Release Date: Mar 31, 1997
================================
The following problems have been fixed in the current release:
1. Added support for NTSC/PAL CRT Panning.
2. Added ExtEscape functions to support ChipsCPL.
3. Fixed NT 4.0 J problem switching to DOS Fullscreen session.

Revision: 1.0.4
Release Date: Mar 10, 1997
================================

1. Added support for 65555 and 68554 chips.

Revision: 1.0.3
Release Date: Mar 03, 1997
================================
The following problems have been fixed in the current release:

1. Underline Text Cursor is missing after switching from Desktop to DOS Command
Prompt full screen session.

2. Text Expansion gets reset during restore of DOS Command Prompt full screen
session.

3. Invalid refresh selection ( 0 Hz ) listed in Display Settings.
-----------------------------------------------------------------------------

Windows NT 4.0 Driver Installation Procedure

Step 1: Install Windows NT as you normally would for a VGA display.
First click the Start button, go to Settings and click on
Control Panel. Choose the Display icon and click on the icon.
In the Display Properties window, click on the Settings tab.
Then click on Change Display Type. In the Change Display Type
window, click on the Change button under Adapter Type. This will
bring up the Select Device window.

Step 2: In the Select Device window, click on the Other button. Enter source
directory where the Windows NT driver files are located. Press
and the name of the Chips and Technologies Video Accelerator
driver will appear at the end of Models list box. Scroll to the end
of the list box and double click on the driver. Once the installation
is complete, the system must be shut down and restarted.
Step 3: Upon restart, select the desired display settings from the Display
property dialog box. Click on Test to test the newly selected
graphics mode. A color test screen should appear, followed by
the Testing Mode window. Click on Yes to continue. The Display
Settings Change window will appear. Click on Restart Now for
the new settings to take effect.

-----------------------------------------------------------------------

To run Chips' NT VPM, do:

1. Copy both of CHIPSVPM.DLL and CHIPS.DLL (display driver) to
\WINNT\SYSTEM32 subdirectory.

2. Modify \WINNT\SYSTEM.INI to add the following two lines:

[drivers32]
VPM=CHIPSVPM.DLL

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 9xxx Series

Model

Clevo 960

Description

PCMCIA Drivers

Operating System

Windows NT4

Version

2.00.07

Size Driver

873KB

File Name

96pcnt4.exe

Observations

CardWizard(TM) for Windows(R) NT 2.00.07 readme file

February 13, 1997
CardWizard for Windows NT installation diskette

Disk contents:

Readme.Txt --- this file
WizNt.z --- compressed file of drivers, DLL's and wizard
Devices.z --- compressed file of serial and ATA drivers
Sockets.z --- compressed file of socket services
_Setup.lib --- library of bitmaps and utility EXE's
_Inst32i.Ex_ --- compressed Install Shield component
Setup.exe --- Install Shield executable
Setup.Ins --- Install Shield component
Setup.pkg --- Install Shield component
_Setup.Dll --- Install Shield component
Cwksoem.ini --- Install Shield installation options lists.
PCCard.ini --- PCCard (Card Services) registry init file.
SSIntel.ini --- I365 compatible controller registry init file.
SSTI1130.ini --- TI1130 controller registry init file.
SSCL67xx.ini --- Cirrus 6729/6730 controller registry init file.
SSCL6832.ini --- Cirrus 6832 controller registry init file.
SSTI1131.ini --- TI1131 controller registry init file.
SSTcic.ini --- DB68082/DB68072 controller registry init file.
SSVadem.ini --- Vadem 365/465/468/469 controller registry init file.
Resman.ini --- Resource Manager registry init file.
Scsi.sft --- support file for SCSI devices
Devapps1.inf --- INF installation file
TO INSTALL CARDWIZARD FOR WINDOWS NT:
-------------------------------------

The installation and un-installation procedures for CardWizard and for the
combined CardWizard/PowerProfiler products are covered in the manual,
"CardWizard for Windows NT, User Guide".

This release of CardWizard for Windows NT requires, "Windows NT version 4.0
Golden", or greater.

This release of CardWizard is designed to work with the, "SystemSoft,
PowerProfiler for Windows NT", power management system. The version
of PowerProfiler must be 2.10.03 or greater.

Warning! CardWizard for Windows NT cannot be installed/uninstalled properly
if a previous version of CardWizard is active on the machine. If the
machine already contains a copy of CardWizard, make sure that the WizNt.Exe
program is not running and that there are no cards in the PCCard slots
before running the Setup program.

TO CUSTOMIZE PLATFORM SETTINGS:
-------------------------------

Many of the CardWizard's parameters are stored in the Windows NT registry
by the Setup program. Some of these entries can be modified to customize
the CardWizard configuration. Note, after changing the registry, the
machine must be rebooted in order for the customizations to take effect.

Access to Official Website Clevo

Home English Drivers English

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 13 files for Clevo 960

Select Files