Clevo 2300C Notebooks & Tablet PCs > Downloads Drivers, Utilities and Manual

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 2xxx Series

Model

Clevo 2300C

Description

Intel TX Chipset

Version

R3.2.2

Size Driver

549KB

File Name

txpatchv322.zip

Observations

INTRODUCTION
***********************
This utility program was developed for updating several
Windows 95* INF files so that Intel(R) 82371SB, 82371AB, and 82371EB
components can be recognized or configured properly in the
system.

CONTENTS OF THIS DOCUMENT
****************************
This document contains the following sections:

1. System Requirements
2. Contents of the Distribution Package
3. INF Files updated the Software
4. Running the Software
5. Verifying INF Update by the Software
6. Troubleshooting
7. Release Notes

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 2xxx Series

Model

Clevo 2300C

Description

Toshiba CD-ROM and Sanyo, Teac DVD-ROM Drivers

Size Driver

401KB

File Name

cdvdriver.zip

Observations

This manual describes how to setup the device driver of TOSHIBA ATAPI
CD/DVD-ROM Drive.
This device driver is exclusive use of following TOSHIBA ATAPI CD/DVD-ROM
drives.
XM-5602B, XM-5702B, XM-6002B, XM-6102B, XM-6202B, XM-6302B
XM-1502B, XM-1602B, XM-2402B, XM-1702B, XM-1802B
SD-M1002, SD-M1102, SD-M1202
How to setup the CD-ROM device driver.

1. Copy CD/DVD-ROM device driver to the system disk.

2. Add the following line to CONFIG.SYS of the system disk.
LASTDRIVE=Z
DEVICE=:\CDROMDRV.SYS

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 2xxx Series

Model

Clevo 2300C

Description

TEAC CD-224E-A CDROM Drivers

Operating System

Windows 95

Version

1.27q

Size Driver

655KB

File Name

teaccdr.exe

Observations

***** How to install the device driver under DOS environment *****

To operate TEAC CD-ROM,the device driver (TEAC_CDI.SYS) has to be installed
from INSTALLATION DISK came along with CD-ROM.
Please follow the instruction below.

1. Boot up the system and insert the INSTALLATION DISK into your floppy
disk drive.

2. At the DOS prompt,type "A:\INSTALL" then press enter. (If your floppy
disk drive is "A:")

3. Installation program will now start.Please follow the instructions on the
screen to complete the installation procedure.

4. When finish,remove the INSTALLATION DISK from the floppy disk drive then
REBOOT your system.

During system reboot,check for the following message to assure that
the driver was loaded properly.

MSCDEX Version 2.23
Copyright (C) Microsoft Corp. 1986-1993. All rights reserved.

Drive X: = Driver TEAC-CDI unit 0

* 'X:' ... Drive letter assigned to CD-ROM Drive

This message means that TEAC CD-ROM drive is now activated.

* Now the installation of TEAC CD-ROMdrive is completed.
***** TEAC CD-ROM DRIVE Trouble Shooting Tips *****

------------------------------------------------------------------------------
Q1: System will not boot when CD-ROM drive is daisy-chained with
hard disk drive.
------------------------------------------------------------------------------
A1: Be sure your hard disk drive jumper is set to MASTER and CD-ROM's to SLAVE.
Please refer to the installation manual for CD-ROM jumper setting and ask
hard drive manufacturer for MASTER jumper setting.
Note: There may be a case where CD-ROM can not be daisy-chained with
Conner hard drive (Conner mode).
A2: Check if the I/F cable is connected reversely.

------------------------------------------------------------------------------
Q2: System hangs without displaying anything when the device driver is loaded
during Boot-up.
------------------------------------------------------------------------------
A1:There is a possibility that TEAC device driver is having a conflict with
others. Please check the position of the device driver statement or remark
driver which may be having a conflict with.
A2:In case that TEAC CD-ROM drive is connected with non TEAC CD-ROM drive in
the same system.
Please re-install the TEAC CD-ROM address by going through 'SELECT I/O PORT'.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 2xxx Series

Model

Clevo 2300C

Description

ALPS Touch Pad Drivers

Operating System

Windows 95

Version

4.1.0

Size Driver

379KB

File Name

alpsw95.exe

Observations

AlpsPoint provides a convenient way to modify setting for
Alps GlidePoint. The AlpsPoint drivers are compatible with
most standard mice and similar pointing devices.
____________________________________________________________

README FILE CONTENTS

1. Driver Installation
1.1 Installing from Mouse Properties
1.2 Installing from Device Manager

2. Using the AlpsPoint Control Panel

3 Restoring Your Installation
3.1 If "Alps GlidePoint" can be seen in the model column
3.2 If "Alps GlidePoint" can't be seen in the model column

4. Using Another Mouse
4.1 How to attach the Serial mouse
4.2 How to attach the PS/2 mouse

5. Troubleshooting
5.1 Suspend/Resume
5.2 Installing from Add New Hardware

6. Files On The Setup Disk

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 2xxx Series

Model

Clevo 2300C

Description

FIR Drivers

Operating System

Windows 95

Version

R1.1

Size Driver

125KB

File Name

firw95.zip

Observations

VCOMM Device Driver
Version 1.1
********************************************************************************

This diskette contains two files that implement the SMC driver
for Infrared communication as described by IrDA, two INF scripts for
installing the drivers in the Windows 95 system and a Microsoft Word
document in a zip format that describes this software.

SmcSer.Vxd -- port driver for SMC IrCC
SmcSer.Inf -- installer for the port driver
SmcIrlap.Vxd -- Infrared Framer for fast speed SMC IrCC
SmcIrlap.Inf -- installer for the framer
Relnotes.Zip -- zipped Microsoft Word document
Readme.Txt -- this file

UPDATES:
--------
This release provides two drivers that are independent from those
that are part of the Microsoft Infrared 2.0 Stack.

Refer to Relnotes.Doc (to unzip it type: Pkunzip Relnotes.Zip Relnotes.Doc)
for the information about the driver installation and configuration of
the resources.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo 2xxx Series

Model

Clevo 2300C

Description

ALPS Touch Pad Drivers

Operating System

Windows NT

Version

1.02

Size Driver

154KB

File Name

alpswnt.exe

Observations

ApointNT provides a convenient way to modify setting for
Alps GlidePoint. The ApointNT drivers are compatible with
most standard mice and similar pointing devices.
____________________________________________________________

README FILE CONTENTS

1. Driver Installation
1.1 Installing from Mouse Properties

2. Using the ApointNT Control Panel

3 Restoring Your Installation
3.1 If "Alps GlidePoint" can be seen in the model column
3.2 If "Alps GlidePoint" can't be seen in the model column

4. Using Another Mouse
4.1 How to attach the PS/2 mouse

5. Troubleshooting
6. Files On The Setup Disk

Access to Official Website Clevo

Home English Drivers English

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 17 files for Clevo 2300C

Select Files