Broadcom 5752 Networks Cards > Downloads Drivers

Company

Broadcom

Categories

Networks Cards

Model

Broadcom 5752

Description

BCM57xx

Version

12.15

Size Driver

8.4MB

File Name

b57udiag-12.15.iso

Observations

Table of Contents:
I) How to view this document
II) What to get, platform dependant
III) How to boot up
IV) Installation
V) Post-installation disk/RAM layout and configuration files
VI) Using FreeDOS
VII) Updates and help
-----------------------------------------------------
How to run User Diagnostic for a BCM57710/11/11E NetXtreme II Device:

Create a bootable CD using the ediag ISO file
Boot to DOS using this CD
Choose option one on the FreeDOS 1.0 Final Cut CD menu
Choose option "Install to HD using FD setup
Run FreeDOS from CD ROM (return to command prompt)
cd to Ediag and run uediag

Company

Broadcom

Categories

Networks Cards

Model

Broadcom 5752

Description

Drivers

Operating System

Netware ODI32

Version

12.23

Size Driver

92KB

File Name

nw_odi32-12.23.zip

Observations

This file contains the description of the NetWare(R) and Broadcom
parameters/keywords accepted by the Broadcom NetXtreme(R) Gigabit and Fast
Ethernet adapter NetWare(R) Server (.LAN) driver.

TxDescriptors=
This is to initialize Descriptor resources on the adapter for transmits.
Min = 32
Max = 512
Default = 200

RxBuffers=
This is to pre-allocate receive ECBs & Receive adapter resources. This setting
may be affected by the Netware server maximum/minimum packet receive buffer settings.
Note: RxBuffers must be set to 32 when using DOS Client32.
Min = 32
Max = 512
Default = 200

Speed=
This keyword is to force the line speed of the adapter using a cat-5 cable.
When this keyword is used, the switch to which the adapter cable is connected
must also be forced to the same speed.
The best way to ensure good connectivity is to not set the speed keyword and
allow for automatic link setup (auto-negotiation).
Choices are :
0=Auto, 10=10Mbs, 100=100Mbs.
Default is Auto. Please note that the 1000Mbs is autonegotiate only and
cannot be forced except on FIBER adapters.

Duplex=
To force the cable to half or full duplex this keyword must be used with
the Speed keyword.
Choices are :
1= half duplex, 0 or 2 = full duplex.
Default is full duplex.

Link=
This keyword is used to allow for autonegotiation using the Speed keyword as the
advertised speed. When set to FORCE, the Speed keyword is forced. When the Speed
keyword is AUTO, normal autonegotiation takes place.
It is best to allow for autonegotiation between the card and switch, by not setting
this keyword or the Speed keyword.
Choices are:
AUTO, FORCE
Default is FORCE.

RxTicks=
This is to enable the use of a receive "tick" interrupt within a
specific time period.
Min = 0, disabled
Max = 5000000, 5 seconds
Units are in micro seconds
Default is 300

Access to Official Website Broadcom

Home English Drivers English

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 19 files for Broadcom 5752

Select Files