Axper XP-P4VM533 Motherboards > Downloads Drivers, Manual and BIOS

Company

Axper

Categories

Motherboards

Model

Axper XP-P4VM533

Description

Manual

Information

Manual

Operating System

Manual

Version

1002

Size Driver

1.6MB

File Name

xp-p4vm533_1002.pdf

Observations

Contents
Motherboard Layout ........................................................................4
1. Production Introduction .............................................................5
1.1. Feature Summary.............................................................................. 5
1.2. I/O Back Panel and Connectors&Jumper Setting ............................. 6
1.2.1. I/O Back Panel ...................................................................................... 6
1.2.2. Connectors & Jumper Setting .............................................................. 6
2. Hardware Installation ................................................................9
2.1. Installation of a Pentium 4 CPU and Fan Sink .................................. 9
2.2. Installation of Memory ..................................................................... 10
2.3. Installation of the Graphics Card ..................................................... 10
3. BIOS Setup ............................................................................ 11
3.1. Setup Screen Features (BIOS version:E9) ...................................... 11
3.2. Standard CMOS Features .............................................................. 12
3.3. Advanced BIOS Features ............................................................... 14
3.4. Integrated Peripherals ..................................................................... 15
3.5. Power Management Setup.............................................................. 17
3.6. PnP/PCI Configuration .................................................................... 18
3.7. PC Health Status ............................................................................. 19
3.8. Frequency/Voltage Control.............................................................. 20
3.9. Load Fail-Safe Defaults ................................................................... 21
3.10. Load Optimized Defaults ................................................................. 21
3.11. Set User Password .......................................................................... 21
3.12. Save & Exit Setup............................................................................ 21
3.13. Exit Without Saving ......................................................................... 21
4. Driver Installation .................................................................... 22

Company

Axper

Categories

Motherboards

Model

Axper XP-P4VM533

Description

Via 8237 LAN

Operating System

Windows 98-Me-2000-XP

Version

3.23.0.0408

Size Driver

833KB

File Name

driver_lan_via_8237.exe

Observations

Contents of the Subdirectory:
=============================

FETND4.SYS The NDIS4 driver for Windows NT.
FETNDH.HLP The help file.
NTUTIL.DLL The user configuration library.
OEMSETUP.INF The setup information file.
WINNT.TXT This file.
Installation:
=============

Before starting with the installation process, make sure that the adapter
is properly installed and configured.

1. Open "Control Panel" -> "Networks", and choose the "Add Adapter" button.
The Add Noetwork Adapter dialog box appears. Select " Requires
disk from manufacturer" in the list of Network Adapters, and then press
.

2. Insert the driver diskette into your floppy drive, and specify the
path of the driver in the diskette(i.e. A:\) if necessary.

3. Select the correct Adapter, and start to copy the driver files to your
system.

4. After all the driver files have been copied to your system, a property
dialog box appears in the screen. You can enable the special properties
if you want to.

5. When the driver installation is completed, restart your PC.

Company

Axper

Categories

Motherboards

Model

Axper XP-P4VM533

Description

Via KM266 VGA

Operating System

Windows 98-Me-2000-XP-NT

Version

13.10.02 NT

Size Driver

2.5MB

File Name

driver_vga_via_km266_nt.exe

Observations

Installing your new S3 Video Driver for Windows NT 4.0.

1. Start system with Windows NT 4.0 installed.
2. IMPORTANT: When the "Please select the operating system to start..." message
is displayed, select "Windows NT Workstation Version 4.00 [VGA mode]".
3. From "Start", select the "Settings group", then click on the
"Control Panel" icon.
4. In the "Control Panel", double click on the "Display" icon.
5. In the "Settings" screen, click on the "Display Type..." button.
6. From the "Display Type" screen, and in the "Adapter Type" section, click
on the "Change..." button.
7. In the "Change Display" screen, click on the "Have Disk..." button.
8. Insert the new display driver diskette into the A:\ drive, then click on
the "OK" button.
9. From the list of displayed S3 devices, select your S3 device.
10. From "Third-party Drivers", click on the "Yes" button to proceed.
11. If a message appears stating the driver is already installed on the
system, and asks if you want to use the current or new drivers, be sure
to select the "New" button.
12. If prompted for the driver diskette a second time, click on the
"Continue" button.
13. When the message "The drivers were successfully installed" is displayed,
remove the display driver diskette, then click on the "OK" button.
14. Back at the "Display Type" window, click on the "Close" button.
15. Back at the "Display Properties" window, click on the "Close" button.
16. When you see the "System Settings Change" window, asking if you wish to
restart your computer, click on the "Yes" window to reboot now.

NOTE: If installing Windows NT 4.00 with the S3 device currently installed
in the system:

Proceed through the Windows NT installation as normal. The installation
program will prompt the user to choose a display mode. Choose the
"Cancel" button from the "Display Settings" screen to ignore this step
for now. The installation will now finish. Once Windows NT has started
for the first time, proceed to follow the steps outlined above to install
the driver for your S3 device.

Company

Axper

Categories

Motherboards

Model

Axper XP-P4VM533

Description

Via KM266 VGA

Operating System

Windows 98-Me-2000-XP-NT

Version

4.14.10.0005 98-Me

Size Driver

4.2MB

File Name

driver_vga_via_km266_9xme.exe

Observations

HKEY_CURRENT_CONFIG\Display\Settings (for test use)
1. AGPSize AGP memory size (in String Value)
Default:
16 for 32-63MB system memory
24 for 64-127MB system memory
28 for 128-255MB system memory
28 for 256MB and above system memory

2. WV ON: enable wait for Vsync
OFF: not wait for Vsync
Default ON

3. DMACB Command DMA memory type
4P: PCI memory
4A: AGP memory
Default 4P

4. COB Enable Command overflow buffer
ON: Enabled
OFF: Disabled
Default ON

Software Requirements
Win95/Win98/WinMe
DirectX 9.0 required
Earlier versions of DirectX are supported, but are not tested or recommended for use with this driver version.

Company

Axper

Categories

Motherboards

Model

Axper XP-P4VM533

Description

Via KM266 VGA

Operating System

Windows 98-Me-2000-XP-NT

Version

6.14.10.0012 2000-XP

Size Driver

3.2MB

File Name

driver_vga_via_km266_2kxp.exe

Observations

How to Update the S3 Graphics Display Driver in Windows XP
===========================================================
To update or change the display driver:

1. Open the Properties for your S3 Graphics Adapter in Device Manager.

To open the Properties dialog:
Click Start, and then click Control Panel. Click Appearance and Themes, and then click Display.
Click the Settings tab, click Advanced, and then click the Adapter tab and click Properties.
2. Click the Driver tab, and then click Update driver.
3. After the Hardware Update Wizard starts, click "Install from a list or specific location"
and then click Next.
4. Select the locations you wish to search for the updated driver files.

If the updated S3 Graphics driver that you want to install is located in a folder
on the hard disk, then check "Include this location in the search" and click Browse
to select that folder.

Note: If the updated driver is not located on a CD or floppy disk, then
uncheck the "Search removable media" box to speed the search process.
5. Click Next to begin the search.
6. The Hardware Update wizard will search the selected locations for the updated display driver.
If Windows XP finds a driver that it determines to be the best match for your hardware
and is better than the currently installed driver, the installation will begin.

Note: If you are installing a driver that has not yet passed Windows Logo
testing for compatibility with Windows XP, a warning message will appear.
If you wish to continue with the driver installation, click Continue Anyway.

A System Restore point will be automatically created by Windows XP before
installing any unsigned driver files. (See Windows XP Help for more on System Restore.)
7. Once all the driver files have been copied, click Finish.

You will then be prompted to restart your computer to complete the driver installation.

Access to Official Website Axper

Home English Home French

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 13 files for Axper XP-P4VM533

Select Files