Encore ENF656-USB-STPR Download Treibers

Verfügbare 4 dateien für ENF656-USB-STPR
Firma
Encore
Komponente
Modem ISDN
Modell
Encore ENF656-USB-STPR
Beschreibung
Drivers
Betriebssystem
Windows 2000
Größe
2.7Mb
Dateiname
enf656-usb-stpr_driver_2000.zip
Beschreibung
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
9) Disclaimers

--------------
1. Quick Start
--------------

1) This version of SmartUSB56 drivers is only compatible with
Microsoft Windows XP and Windows 2000.

2) If any type of Smart Link modem is already installed in your
system and you want to update its' device driver, first
uninstall existing drivers (See Uninstall Procedure), and only
then proceed to install the new drivers.
To install your modem drivers for the first time:
-------------------------------------------------
a) Plug in the modem into a USB port.

b) Windows will instantly detect the modem and will start software
installation.

c) When requested, point to the drivers installtion directory on
the floppy disk or CD-ROM.

d) Modem drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------

To verify that the modem is installed correctly, follow these steps:

a) Click "Start > Settings > Control Panel > Modem": check for the
presence of a "SmartUSB56 Modem".

b) In "Control Panel > Modems > Properties > Diagnostics" click on
"Query Modem" button and check that the modem responds.

To Check that the modem is working properly:

a) Open "Hyper Terminal".
b) Select the "SmartUSB56 Modem" or "Direct to port" option.
c) Type ATI1, ATI2 or ATI3 and make sure you receive the modem IDs.
Dial any accessible phone number, and see that that phone rings.
Dial to another modem (ATDTxxx or via the dial button of the
TAPI interface) and see that a modem session is established.

If you have successfully connected, then the modem has been
successfully installed.
Firma
Encore
Komponente
Modem ISDN
Modell
Encore ENF656-USB-STPR
Beschreibung
Drivers
Betriebssystem
Windows 98-98Se
Größe
2.6Mb
Dateiname
enf656-usb-stpr_driver_98se.zip
Beschreibung
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
9) Disclaimers

--------------
1. Quick Start
--------------

1) This version of SmartUSB56 drivers is compatible with Microsoft
Windows 98, Windows 98SE and Windows ME.

THESE DRIVERS ARE NOT COMPATIBLE WITH WINDOWS 95 OR WINDOWS 2000!

2) If any type of Smart Link modem is already installed in your
system and you want to update its' device driver, first
uninstall existing drivers (See Uninstall Procedure), and only
then proceed to install the new drivers.
To install your modem drivers for the first time:
-------------------------------------------------
a) Plug in the modem into a USB port.

b) Windows will instantly detect the modem and will start software
installation.

c) When requested, point to the drivers installtion directory on
the floppy disk or CD-ROM.

d) Modem drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------

To verify that the modem is installed correctly, follow these steps:

a) Click "Start > Settings > Control Panel > Modem": check for the
presence of a "SmartUSB56 Modem".

b) In "Control Panel > Modems > Properties > Diagnostics" click on
"More Info" button and check that the modem responds.

To Check that the modem is working properly:

a) Open "Hyper Terminal".
b) Select the "SmartUSB56 Modem" or "Direct to port" option.
c) Type ATI1, ATI2 or ATI3 and make sure you receive the modem IDs.
Dial any accessible phone number, and see that that phone rings.
Dial to another modem (ATDTxxx or via the dial button of the
TAPI interface) and see that a modem session is established.

If you have successfully connected, then the modem has been
successfully installed.
Firma
Encore
Komponente
Modem ISDN
Modell
Encore ENF656-USB-STPR
Beschreibung
Drivers
Betriebssystem
Windows Me
Größe
2.7Mb
Dateiname
enf656-usb-stpr_driver_me.zip
Beschreibung
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
9) Disclaimers

--------------
1. Quick Start
--------------

1) This version of SmartUSB56 drivers is only compatible with
Microsoft Windows ME.

THESE DRIVERS ARE NOT COMPATIBLE WITH WINDOWS 98 OR WINDOWS 2000!

2) If any type of Smart Link modem is already installed in your
system and you want to update its' device driver, first
uninstall existing drivers (See Uninstall Procedure), and only
then proceed to install the new drivers.
To install your modem drivers for the first time:
-------------------------------------------------
a) Plug in the modem into a USB port.

b) Windows will instantly detect the modem and will start software
installation.

c) When requested, point to the drivers installtion directory on
the floppy disk or CD-ROM.

d) Modem drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------

To verify that the modem is installed correctly, follow these steps:

a) Click "Start > Settings > Control Panel > Modem": check for the
presence of a "SmartUSB56 Modem".

b) In "Control Panel > Modems > Properties > Diagnostics" click on
"More Info" button and check that the modem responds.

To Check that the modem is working properly:

a) Open "Hyper Terminal".
b) Select the "SmartUSB56 Modem" or "Direct to port" option.
c) Type ATI1, ATI2 or ATI3 and make sure you receive the modem IDs.
Dial any accessible phone number, and see that that phone rings.
Dial to another modem (ATDTxxx or via the dial button of the
TAPI interface) and see that a modem session is established.

If you have successfully connected, then the modem has been
successfully installed.
Firma
Encore
Komponente
Modem ISDN
Modell
Encore ENF656-USB-STPR
Beschreibung
Drivers
Betriebssystem
Windows XP
Größe
2.7Mb
Dateiname
enf656-usb-stpr_driver_xp.zip
Beschreibung
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
9) Disclaimers

--------------
1. Quick Start
--------------

1) This version of SmartUSB56 drivers is only compatible with
Microsoft Windows XP and Windows 2000.

2) If any type of Smart Link modem is already installed in your
system and you want to update its' device driver, first
uninstall existing drivers (See Uninstall Procedure), and only
then proceed to install the new drivers.
To install your modem drivers for the first time:
-------------------------------------------------
a) Plug in the modem into a USB port.

b) Windows will instantly detect the modem and will start software
installation.

c) When requested, point to the drivers installtion directory on
the floppy disk or CD-ROM.

d) Modem drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------

To verify that the modem is installed correctly, follow these steps:

a) Click "Start > Settings > Control Panel > Modem": check for the
presence of a "SmartUSB56 Modem".

b) In "Control Panel > Modems > Properties > Diagnostics" click on
"Query Modem" button and check that the modem responds.

To Check that the modem is working properly:

a) Open "Hyper Terminal".
b) Select the "SmartUSB56 Modem" or "Direct to port" option.
c) Type ATI1, ATI2 or ATI3 and make sure you receive the modem IDs.
Dial any accessible phone number, and see that that phone rings.
Dial to another modem (ATDTxxx or via the dial button of the
TAPI interface) and see that a modem session is established.

If you have successfully connected, then the modem has been
successfully installed.
HelpDrivers Von M�rz 2000