Comtrol RocketModem II v.90 PCI Fax & Modem & ISDN > Downloads Drivers, Utilities and Manual

Company

Comtrol

Categories

Fax & Modem & ISDN

Model

Comtrol RocketModem II v.90 PCI

Description

Software Installation

Information

Manual PDF for Windows ME

Operating System

Manual

Version

THIRD EDITION

Size Driver

1MB

File Name

rckt_win98.pdf

Observations

Table of Contents
Table of Contents ................................................................................................................................3
Product Overview...............................................................................................................................5
Locating Current Drivers ............................................................................................................................ 5
Hardware Installation Documentation .................................................................................................... 5
Driver Features............................................................................................................................................. 5
Installation Prerequisites........................................................................................................................... 6
Installing the Device Driver..............................................................................................................7
Disabling or Removing the Driver ............................................................................................................ 7
Disabling the Windows 98/SE or ME Device Driver ....................................................................................................7
Removing PCI-Bus Adapters........................................................................................................................................7
Removing the Windows 98/SE or ME Device Driver ...................................................................................................7
Installing the New Driver........................................................................................................................... 8
Extracting the Installation Files..................................................................................................................................8
Installing Software: PCI, Universal PCI, or CompactPCI bus....................................................................................9
Installing Software: ISA-Bus......................................................................................................................................11
Advanced Configuration........................................................................................................................... 15
COM Port Numbering.................................................................................................................................................15
Remapping Baud Rates ..............................................................................................................................................16
Scan Rate.....................................................................................................................................................................17
Installation Without a Dedicated IRQ........................................................................................................................17
Stay Resident ..............................................................................................................................................................17
Fast ..............................................................................................................................................................................17
Changing the IRQ .......................................................................................................................................................17
Adding Adapters ......................................................................................................................................... 18
Adding PCI-Bus Adapters ..........................................................................................................................................18
Adding ISA-Bus Adapters...........................................................................................................................................18
Installing Modems and Adding Serial Printers..........................................................................21
Installing Modems ...................................................................................................................................... 21
Installation Requirements..........................................................................................................................................21
Installing a Modem .....................................................................................................................................................21
RocketModem Reconfiguration...................................................................................................................................27
Adding Serial Printers ............................................................................................................................... 28
Changing Printer Port Configuration .........................................................................................................................31
Changing Printer Port Assignment ............................................................................................................................31

Company

Comtrol

Categories

Fax & Modem & ISDN

Model

Comtrol RocketModem II v.90 PCI

Description

Software Installation

Information

Manual PDF for Windows NT4

Operating System

Manual

Version

Size Driver

672KB

File Name

rckt_winnt.pdf

Observations

Table of Contents
Table of Contents................................................................................................................................ 3
Overview............................................................................................................................................... 5
How to Use this Document .......................................................................................................................... 5
Driver Requirements................................................................................................................................... 5
Locating Hardware Installation Documentation .................................................................................. 5
Installation Prerequisites ........................................................................................................................... 6
Driver and Adapter Information ..................................................................................................... 7
Removing an Existing Driver ..................................................................................................................... 7
Installing the Device Driver ....................................................................................................................... 8
Changing or Viewing Driver Configuration ......................................................................................... 15
Changing or Viewing Adapter Configuration ...................................................................................... 17
Changing or Viewing Port Configuration ............................................................................................. 19
Adding an Adapter ..................................................................................................................................... 22
Removing an Adapter................................................................................................................................ 22
Windows NT Configuration Overview.......................................................................................... 23
Configuring Modems ................................................................................................................................. 23
Installing and Configuring RAS............................................................................................................... 26
Configuring Printers ................................................................................................................................. 31
Comtrol Tools .................................................................................................................................... 34
Using Test Terminal .................................................................................................................................. 34
Using Port Monitor .................................................................................................................................... 37
Using Peer Tracer ...................................................................................................................................... 42
Troubleshooting and Technical Support ..................................................................................... 44
Troubleshooting.......................................................................................................................................... 44
Device Driver and OS Capabilities and Limitations........................................................................... 45
Technical Support...................................................................................................................................... 47
Index .................................................................................................................................................... 48

Company

Comtrol

Categories

Fax & Modem & ISDN

Model

Comtrol RocketModem II v.90 PCI

Description

Software Installation

Information

Manual PDF for Windows XP

Operating System

Manual

Version

Size Driver

3.4MB

File Name

rckt_winxp.pdf

Observations

This guide was originally written for Windows XP, but you can also use it for Windows Server 2003 installations. Table of Contents
Overview ............................................................................................................................................................... 5
Driver Requirements ....................................................................................................................................... 5
Locating Current Drivers ................................................................................................................................ 5
Hardware Installation Documentation............................................................................................................ 5
Driver Features................................................................................................................................................ 6
Upgrading Your Operating System to Windows XP ....................................................................................... 6
Installing the Device Driver............................................................................................................................. 7
Installation Procedures.................................................................................................................................... 7
Upgrading the Driver (Existing Installation).................................................................................................. 9
Found New Hardware Wizard Installation (Driver Not Found) .................................................................. 15
Changing or Configuring Device Properties.................................................................................................. 19
Configuring Port Properties ........................................................................................................................... 21
Removing the Adapter and Driver ................................................................................................................. 24
Configuring Non-Plug and Play Devices...................................................................................................... 25
Installing Non-Plug and Play Devices ........................................................................................................... 25
Comtrol Tools..................................................................................................................................................... 33
Installing the Utilities (Windows 2000 and Windows XP) ........................................................................... 33
Using Test Terminal ...................................................................................................................................... 35
Using Port Monitor ........................................................................................................................................ 38
Using Peer Tracer .......................................................................................................................................... 43
Troubleshooting and Technical Support ..................................................................................................... 45
Troubleshooting.............................................................................................................................................. 45
Before calling Technical Support ................................................................................................................... 45
Technical Support .......................................................................................................................................... 46
Index .................................................................................................................................................................... 47

Company

Comtrol

Categories

Fax & Modem & ISDN

Model

Comtrol RocketModem II v.90 PCI

Description

Software Installation

Information

Manual PDF for Windows Server 2003

Operating System

Manual

Version

Size Driver

3.4MB

File Name

rckt_winxp.pdf

Observations

Company

Comtrol

Categories

Fax & Modem & ISDN

Model

Comtrol RocketModem II v.90 PCI

Description

Software Installation

Information

Manual PDF for Windows 2000

Operating System

Manual

Version

Size Driver

638KB

File Name

rckt_win2000.pdf

Observations

Table of Contents
Table of Contents................................................................................................................................ 3
Overview............................................................................................................................................... 5
How to Use this Document .......................................................................................................................... 5
Driver Requirements................................................................................................................................... 5
Driver Features............................................................................................................................................. 5
Locating Hardware Installation Documentation .................................................................................. 5
Upgrading Your Operating System to Win2000 ..................................................................................... 6
Driver and Adapter Information ..................................................................................................... 7
Removing or Disabling the Adapter ........................................................................................................ 7
Installing the Driver .................................................................................................................................... 7
Upgrading the Driver ................................................................................................................................ 13
Accessing the Main Setup Tab.................................................................................................................. 17
Changing Device Properties..................................................................................................................... 18
Configuring Device Properties ................................................................................................................ 19
Configuring Port Properties..................................................................................................................... 20
Adding Additional Adapters ..................................................................................................................... 20
Configuring Modems Overview...................................................................................................... 21
Installing Modems...................................................................................................................................... 21
Comtrol Tools .................................................................................................................................... 25
Installing the Utilities (Windows 2000 and Windows XP).................................................................. 25
Using Test Terminal .................................................................................................................................. 27
Using Port Monitor .................................................................................................................................... 30
Using Peer Tracer ...................................................................................................................................... 35
Troubleshooting and Technical Support ..................................................................................... 37
Troubleshooting.......................................................................................................................................... 37
Technical Support...................................................................................................................................... 38
Index .................................................................................................................................................... 39

Company

Comtrol

Categories

Fax & Modem & ISDN

Model

Comtrol RocketModem II v.90 PCI

Description

Rawrite Documentation

Operating System

Manual

Version

Size Driver

2KB

File Name

rawrite3.doc

Observations

Documentation on using Rawrite.exe.

RaWrite 1.3
------------

Disclaimer of Warrenty
----------------------

Users of this software must accept this disclaimer of warranty: "This
software is supplied AS IS. Mark Becker disclaims all warranties, expressed
or implied, including, without limitation, the warranties of merchantability
and of fitness for any purpose. Mark Becker assumes no liability for
damages, direct or consequential, which may result from the use of this
software."
Purpose
-------

Write a disk image file to a floppy disk.
Equipment/Software Requirements
-------------------------------

* PC/XT/AT or 100% compatible with at least 256K of RAM and a floppy disk
drive.

* MS-DOS version 3.21 or greater.

* A formatted diskette.

This program uses well-documented generic low-level DOS and BIOS functions.
It should run on nearly every PC in existance. PS/2's should be able to run
RaWrite but this has not been tested.

CAVEAT
------

This program will write ANY disk file to a floppy, overwriting any previous
information that may have been present. If you wish to re-use a diskette
that has been written to by RaWrite then that diskette will probably need to
be reformatted; all MS-DOS specific information will have been erased.
Usage
-----

C> RAWRITE

And follow the prompts. All arguments are case-insensitive.

If the source and destination drives are the same, RaWrite will ask the user
to swap diskettes as required. Rawrite allocates a large buffer in RAM to
reduce the number of disk swaps.

RaWrite may be aborted at any time by typing ^C or CTRL-Break.

Company

Comtrol

Categories

Fax & Modem & ISDN

Model

Comtrol RocketModem II v.90 PCI

Description

Using Comtrol Diagnostics

Operating System

Manual TXT

Version

Size Driver

3KB

File Name

readme.txt

Observations

USING COMTROL DIAGNOSTICS

You will need to download at least two files from the Diag
directory to create your own bootable floppy diagnostic diskette.
Contained in each Diag directory are the following files:

* Diskette image file (*.i)

* Rawrite.exe

Note: The Rawrite3.doc file contains similar information as
this file.
MAKING BOOTABLE DIAGNOSTIC DISKETTES
------------------------------------
To run the diagnostics, you will need to create your own bootable
diagnostic diskette using a High-Density (HD), 1.44M diskette and
using the directions for one of the following operating systems:

* Windows

* DOS

* Unix

-------
WINDOWS
-------
To create a bootable diagnostics diskette, after downloading the
image file and Rawrite.exe from the Comtrol ftp site:

1. Obtain a formatted 1.44MB diskette.

2. Go to the appropriate Diag directory for your hardware type
and double-click on Rawrite.exe.

RaWrite may be aborted at any time by typing ^C or CTRL-Break.

3. Enter the disk image source file name. For example:

150xxxxY.i or 180xxxxY.i

where: xxxx are numbers and Y is an alpha-character.

4. Enter the target diskette drive. For example: a

5. Insert the formatted diskette into the target drive and press
the ENTER key.
---
DOS
---
To create a bootable diagnostics diskette, after downloading the
image file and Rawrite.exe from the Comtrol ftp site:

1. Obtain a formatted 1.44MB diskette.

2. To format a diskette in drive: a, type at the DOS prompt:
format a:

3. At the DOS prompt, enter the appropriate directory path from
the CD. For example:

4. To start Rawrite, type:

\ rawrite
----
UNIX
----
To create a bootable diagnostics diskette, use the dd command to
copy the diskette image file out to a floppy drive. For example:

dd if=/
of=/dev/rfd0135ds18 (primary 3.5" drive)

Company

Comtrol

Categories

Fax & Modem & ISDN

Model

Comtrol RocketModem II v.90 PCI

Description

Device Driver

Operating System

Novell 4.11

Version

5.05

Size Driver

164KB

File Name

1800014b.zip

Observations

for Novell 4.X and 5.0 is available. RocketPort/RocketModem
Novell Driver Assembly
History
20 Mar 2000 - 5.05
Updated AIORCKT.DOC

11 Feb 00 - V5.04
Update the driver to support the PCI RocketModem boards. Also added support for PCI detection by making the driver NBI aware. The FINDRCKT DOS utility has been removed and its functionality has been moved inside the driver and can be used by entering 'LOAD AIORCKT FINDPCI'. With The PCI detection now in the driver the method of loading the driver for a PCI board has been changed to 'LOAD AIORCKT PCI'. A simple terminal utility, 'RCKTTERM.NLM', has been added. It provides a way of selecting a board and a port or ports for LOOPBACK testing or a method of talking directly to a modem.
-WRD

11 Feb 99 - V5.03
Modify FINDRCKT to identify RP 4RJ, fix 32port bug.
-FABA

20 May 98 - V5.02
Recompile AIORCKT using SDK 2.0c for 3.12 compatibility. Add 56K V.90 RocketModem definitions.
Tinker with AcquirePort to reject HYPERBAUD attempts on non-HYPERBAUD (i.e., non-921) boards.
-FABA

14 Apr 98 - V5.01
NWCCON fails to complete initialization of ports associated with modems defined as 'United Kingdom' or 'United States'. Altered modem descriptions to 'UK' and 'USA'.
-FABA

1 Apr 98 - V5.00
Added international RocketModem support. Added error and info code numbers.
-FABA

9/30/97 - V4.02
This release adds support for the Ring Indicator status bit on the RocketPort Plus (921) board. It also fixes a problem with NOVELLs 'GetPortsRollCall'. It returned 0 for the 'external status' and 'changed external status' fields.
-WRD

8/13/97 - V4.01
This release is essentially the same as V4.00. It was necessary to change the revision because of the way the files are grouped when the driver is shipped. The problem was in INETCFG. It was impossible to select the HYPERBAUD option for the 921 board. This required changes to the AIORCKT.ADI file. To keep revisions straight it became necessary to rev the driver. This driver did ship on the RocketModem diskette (6550).
-WRD

Company

Comtrol

Categories

Fax & Modem & ISDN

Model

Comtrol RocketModem II v.90 PCI

Description

Device Driver

Operating System

Novell 5.0

Version

5.05

Size Driver

164KB

File Name

1800014b.zip

Observations

Company

Comtrol

Categories

Fax & Modem & ISDN

Model

Comtrol RocketModem II v.90 PCI

Description

Device Driver

Operating System

Windows 2000

Version

4.71

Size Driver

342KB

File Name

1800001g.exe

Observations

RocketPort/RocketModem(R) Device Driver for Windows 2000(TM),
Windows XP(TM), and Windows 2003(TM) Operating Systems
---------------------------------------
RocketModemIII ONLY: FAX Class 1 & 1.0.

When using the Microsoft TAPI, there may be a long delay in
responding to adaptive answer. You may receive the CONNECT message
twice.

Some FAX applications including Microsoft FAX, may have problems
operating in FAX class 1 & 1.0.

For these reasons, Comtrol Technical Support recommends using FAX
class 2.

---------------------------------
INSTALLING THE DEVICE DRIVER(PCI board)

Use the following procedure to install the device driver for
the first time with a RocketPort PCI board.

After the board is installed in the machine, when Windows 2000
powers up the Found New Hardware Wizard will see this new PCI
board as a PCI Simple Communications Controller. Select
search for driver files and click next. On the next sheet
select "Other Locations" to search for drivers.
You will then need to type in the path to the driver disk
or directory with the RocketPort drivers.

After the driver files are copied over, you can set the starting
com-port name by starting the Device Manager in the control panel,
select Multiport serial adapters and then
select the RocketPort card. An options sheet is available
to adjust these options.

---------------------------------
INSTALLING THE DEVICE DRIVER(Pass 2 - RocketModem II PCI board)

If you are installing a RocketModem II PCI board for the first
time, the Found New Hardware wizard will start a second time
after the driver for the RocketModem board has been installed.
This second pass is necessary to locate and install the modems.

Initially, the wizard will see the (first) new PCI modem as a
Conexant Compatible External PnP Modem. Select search for driver
files and click next. On the next sheet select "Other Locations"
to search for drivers. You will then need to type in the path to
the driver disk or directory with the RocketModem drivers.

The remaining modems on the RocketModem II board will be installed
automatically once the installation for the first modem is done.

---------------------------------
INSTALLING THE DEVICE DRIVER(ISA board)

Use the following procedure to install the device driver for
the first time with a RocketPort ISA board.

After the board is installed in the machine, run the Add Hardware
Wizard from the Windows 2000 control panel. Select Multiport serial
adapter to install. Then select the button.
You will need to type in the path to the driver disk or
directory with the RocketPort drivers.

The resources should be selected according to your switch
selection on the RocketPort board. The RocketPort ISA board
switch setting default from the factory are 180H io-address.

Company

Comtrol

Categories

Fax & Modem & ISDN

Model

Comtrol RocketModem II v.90 PCI

Description

Japanese Approval for Telecommunications Equipment (JATE) Device Driver

Operating System

Windows 2000

Version

1.03

Size Driver

458KB

File Name

1800075a.exe

Observations

Do NOT use this driver at North American sites. Do NOT install this driver in Windows XP systems. RocketPort/RocketModem(R) Device Driver for Windows(TM) NT2000 Operating System

For NT2000 Operating System only, not for NT4.0 or NT3.51.
---------------------------------
INSTALLING THE DEVICE DRIVER(PCI board)

Use the following procedure to install the device driver for
the first time with a RocketPort PCI board.

After the board is installed in the machine, when Windows NT5.0
powers up the Found New Hardware Wizard will see this new PCI
board as a PCI Simple Communications Controller. Select
search for driver files and click next. On the next sheet
select "Other Locations" to search for drivers.
You will then need to type in the path to the driver disk
or directory with the RocketPort drivers.

After the driver files are copied over, you can set the starting
com-port name by starting the Device Manager in the control panel,
select Multiport serial adapters and then
select the RocketPort card. An options sheet is available
to adjust these options.

---------------------------------
INSTALLING THE DEVICE DRIVER(Pass 2 - RocketModem II PCI board)

If you are installing a RocketModem II PCI board for the first
time, the Found New Hardware wizard will start a second time
after the driver for the RocketModem board has been installed.
This second pass is necessary to locate and install the modems.

Initially, the wizard will see the (first) new PCI modem as a
Conexant Compatible External PnP Modem. Select search for driver
files and click next. On the next sheet select "Other Locations"
to search for drivers. You will then need to type in the path to
the driver disk or directory with the RocketModem drivers.

The remaining modems on the RocketModem II board will be installed
automatically once the installation for the first modem is done.

---------------------------------
INSTALLING THE DEVICE DRIVER(ISA board)

Use the following procedure to install the device driver for
the first time with a RocketPort ISA board.

After the board is installed in the machine, run the Add Hardware
Wizard from the Windows NT5.0 control panel. Select Multiport serial
adapter to install. Then select the button.
You will need to type in the path to the driver disk or
directory with the RocketPort drivers.

The resources should be selected according to your switch
selection on the RocketPort board. The RocketPort ISA board
switch setting default from the factory are 180H io-address.

After the driver is installed, you can set the starting
com-port name by starting the Device Manager in the control panel,
select Multiport serial adapters and then select the RocketPort card.
An options sheet should be available to adjust the options.

Reboot the machine after the installation.

Company

Comtrol

Categories

Fax & Modem & ISDN

Model

Comtrol RocketModem II v.90 PCI

Description

Device Driver

Operating System

Windows 98

Version

1.71

Size Driver

383KB

File Name

1800004e.exe

Observations

Do NOT install this driver in Windows 2000/XP operating systems. Readme File
RocketPort/RocketModem Series Driver for Windows 98/SE and Windows ME
P/N: 1800004
=============================================================================

This readme file provides you with a links to the Software Installation Guide for
this driver.

See the History.txt file for information about the hardware platforms that are
supported by this driver.
DOWNLOAD THE LATEST
---------------------------------------
Use this link to download the latest released driver for your hardware.
http://support.comtrol.com/download.asp?partnumber=1800004

Use this link to download the latest Software Installation Guide.
http://support.comtrol.com/download.asp?partnumber=2000101
USE THE SOFTWARE AND DOCUMENTATION CD
---------------------------------------------------------------------------
You can use the menu system to locate the driver and documentation shipped with
the hardware.

Optionally, you can located the driver and installation documentation by browsing
the CD to the appropriate hardware platform and operating system. The Software
Installation Guide is located in the SW_Doc subdirectory for that operating
system. Hardware installation information is available in the HW_Doc subdirectory
for your platform.

Company

Comtrol

Categories

Fax & Modem & ISDN

Model

Comtrol RocketModem II v.90 PCI

Description

Device Driver

Operating System

Windows ME

Version

1.71

Size Driver

383KB

File Name

1800004e.exe

Observations

Company

Comtrol

Categories

Fax & Modem & ISDN

Model

Comtrol RocketModem II v.90 PCI

Description

Japanese Approval for Telecommunications Equipment (JATE) Device Driver

Operating System

Windows NT4

Version

1.02

Size Driver

466KB

File Name

1800037c.exe

Observations

Do NOT use this driver at North American sites. Software installation documentation is available. Do NOT install this driver in Windows 2000/XP systems. RocketModemII(TM) Series Device Driver (Japanese Version)
for the Windows NT(R) operating system
=================================================================
DOCUMENT SCOPE AND LIMITS

Use this readme file to install the Comtrol Windows NT driver for
the following products:

* RocketModemII
--------------------------------------------------------------
INSTALLATION PREREQUISITES

1. This guide assumes that you have already installed the
Windows NT operating system (OS) and that you understand
OS operation. This product was developed and tested
using Windows NT Release 3.51, Windows NT Release 4.0,
BackOffice 4.0, Terminal Server 4.0, and Citrix WinFrame
Release 1.7.

These instructions are based on Windows NT Release 4.0.
If you are using another version, adapt the instructions
as needed.

2. You must have at least one RocketModemII
adapter installed before installing this driver. See the
hardware documentation for more information.

3. If you are using NT 3.51 or an early version of NT 4.0
with no service packs applied, and using the
RocketModemII to provide dial-in (RAS)
access to the NT server, verify that NetBEUI is installed
before installing RAS.

Under NT 4.0, RAS will not work properly unless you have
at least Service Pack 3 applied. For more information
about service packs and updates, contact Microsoft.

4. If you are installing the RocketModemII in a
server without an existing network adapter (NIC), you
must install network services and the Microsoft Loopback
Adapter software first. See the Microsoft documentation
for more information.

5. Finally, if you are upgrading from an earlier version of
the RocketModemII device driver software, you
must remove the old software before installing this new
version. DO NOT use the Update option.

--------------------------------------------------------------
INFORMATION AVAILABLE IN OTHER SOURCES

The following topics are not discussed in this readme file:

* Hardware installation
* Port configuration
* Modem configuration
* Printer configuration
* Device driver capabilities and limitations

Company

Comtrol

Categories

Fax & Modem & ISDN

Model

Comtrol RocketModem II v.90 PCI

Description

Device Driver

Operating System

Windows NT4

Version

4.54

Size Driver

490KB

File Name

1800011h.exe

Observations

Do NOT install this driver in Windows 2000/XP operating systems. RocketPort(R)/RocketModem(TM) Series Device Driver
for the Windows NT(R) operating system
=================================================================
DOCUMENT SCOPE AND LIMITS

Use this readme file to install the Comtrol Windows NT driver for
the following products:

* RocketPort ISA and PCI series
* RocketPort 485
* RocketPort 422
* RocketPort Plus
* RocketPort UPCI
* RocketModem
* RocketModem i
* RocketModemII

NOTE: The RocketPort 8J, which features eight RJ11 connectors on
the mounting bracket, does not support full modem-control
and is not recommended for remote access use.

The RocketPort 8, which features an external interface box,
and the RocketPort Octacable, which features a fanout
cable, do support full modem control.

--------------------------------------------------------------
INSTALLATION PREREQUISITES

1. This guide assumes that you have already installed the
Windows NT operating system (OS) and that you understand
OS operation. This product was developed and tested
using Windows NT Release 3.51, Windows NT Release 4.0,
BackOffice 4.0, Terminal Server 4.0, and Citrix WinFrame
Release 1.7.

These instructions are based on Windows NT Release 4.0.
If you are using another version, adapt the instructions
as needed.

2. You must have at least one RocketPort or RocketModem
adapter installed before installing this driver. See the
hardware documentation for more information.

3. If you are using NT 3.51 or an early version of NT 4.0
with no service packs applied, and using the
RocketPort/RocketModem adapter to provide dial-in (RAS)
access to the NT server, verify that NetBEUI is installed
before installing RAS.

Under NT 4.0, RAS will not work properly unless you have
at least Service Pack 3 applied. For more information
about service packs and updates, contact Microsoft.

4. If you are installing the RocketPort/RocketModem in a
server without an existing network adapter (NIC), you
must install network services and the Microsoft Loopback
Adapter software first. See the Microsoft documentation
for more information.

5. Finally, if you are upgrading from an earlier version of
the RocketPort/RocketModem device driver software, you
must remove the old software before installing this new
version. DO NOT use the Update option.

-------------------------------------------------------------
INFORMATION AVAILABLE IN OTHER SOURCES

The following topics are not discussed in this readme file:

* Hardware installation
* Port configuration
* Modem configuration
* Printer configuration
* Device driver capabilities and limitations

Company

Comtrol

Categories

Fax & Modem & ISDN

Model

Comtrol RocketModem II v.90 PCI

Description

Device Driver

Operating System

Windows Server 2003

Version

4.71

Size Driver

342KB

File Name

1800001g.exe

Observations

Company

Comtrol

Categories

Fax & Modem & ISDN

Model

Comtrol RocketModem II v.90 PCI

Description

Device Driver

Operating System

Windows XP

Version

4.71

Size Driver

342KB

File Name

1800001g.exe

Observations

Access to Official Website Comtrol

Home English Drivers English

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 32 files for Comtrol RocketModem II v.90 PCI

Select Files