I-OMagic Magic I-O 1 ParAllel Other Peripherals

Company

I-OMagic

Categories

Other Peripherals

Model

I-OMagic Magic I-O 1 ParAllel

Description

DR-IOEPP01 IEFD IDVD16DDMe DR-MD400 DR-CDRW1640

Operating System

MS-Dos

Size Driver

63KB

File Name

iopci_dos.zip

Observations

Normally any serial and parallel I/O ports can be supported by BIOS call
services in DOS environment. However there are only support 4 serial ports
(3F8h,2F8h,3E8h,,2E8h) and 3 parallel ports (3BCh/378h/278h) are supported
by BIOS/DOS.

In case the PCI serial and parallel ports are different from the
above configurations (e.g. I/O address or more than 4 serial ports / 3
parallel ports), they are not supported by BIOS/DOS directly. However some
applications (e.g. "PComm Plus" could support 8 serial ports and each I/O
address is settable) have their own driver, thus PCI cards could
work correctly.

The following procedures will instruct you to install PCI serial
and parallel port device driver for DOS and Windows 3.1

[DOS 5.0 / 6.0 /6.22]
=====================

(1) Run Intsall.exe (from DOS driver disk)
(2) Enter the destination subdirectory

You could enter your preferred destination subdirectory for
installation, RETURN for default path. Once the dos driver has been
installed successfully, the response looks like below.
Note :

1.The installation program will add the dos driver (one command line)
"C:\PCI_DOS\PciDos.exe AUTO" to autoexec.bat file. The original batch
file will be saved to autoexec.SNX.

2.For uninstallation, just restore autoexec.snx into autoexec.bat.
(3) Start the dos driver automatically

Once the installation is completed, Install.exe will start the dos driver
(PciDos.exe) automatically. This means that it is not necessary to
restart the system once again.
(4) Check / inquire the PCI card information

You could run PciDos.exe any time to inquire the PCI serial and
parallel port's I/O address & IRQ information.

ISA (ALT-I) : Detect on-board/ISA legacy serial /parallel ports.
PCI (ALT-P) : Find PCI serial /paralles ports.
Setup (ALT-S) : Remap PCI serial port to legacy port/display port resources.
Card (ALT-C) : Display PCI card model.
About (ALT-A) : Version Information.

NOTE :
1. All PCI parallel ports are possible to be remapped to legacy I/O
address (378h,278h), thus the DOS driver will start remapping function
automatically if any one of legacy ports is free.

2. Since some PCI serial ports can support the remapping function
(e.g. 4025D/4027D/4028D/4036D/4037D/4038D/4079D/E/F). thus please check
it by "SETUP" in PciDos.exe utility.

3. Since PCI serial card are drived by a higher CLK (14.7456 Mhz),
thus the actual baudarate is 8 times higher than the BIOS/DOS baudrate
setting. The below table shows the relation.

Company

I-OMagic

Categories

Other Peripherals

Model

I-OMagic Magic I-O 1 ParAllel

Description

DR-IOEPP01 IEFD IDVD16DDMe DR-MD400 DR-CDRW1640

Operating System

Windows 2000

Size Driver

505KB

File Name

pciio_2k.zip

Observations

[Version]
Signature="$Windows NT$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%MFGNAME%
DriverVer=02/26/2004,6.000.0.0
CatalogFile=snxpci.cat

[Manufacturer]
%MFGNAME%=DeviceList,NTx86.5.1

[ControlFlags]
ExcludeFromSelect=*

[DeviceList.NTx86.5.1]
%S_DESCRIPTION%=SDriverInstall_XP, SNXPCARD_SERP
%P_ECP_DESCRIPTION%=PDriverInstall_XP, SNXPCARD_PARPECP
%P_SPP_DESCRIPTION%=PDriverInstall_XP, SNXPCARD_PARPSPP

[DeviceList]
%S_DESCRIPTION%=SDriverInstall, SNXPCARD_SERP
%P_ECP_DESCRIPTION%=PDriverInstall, SNXPCARD_PARPECP
%P_SPP_DESCRIPTION%=PDriverInstall, SNXPCARD_PARPSPP
[SDriverInstall.NTx86]
AddReg=SDriverAddReg
CopyFiles=SCopyFiles,SCopyFilesDLL
Include=msports.inf
Needs=SerialEnumerator.NT

[SDriverInstall.NTx86.HW]
AddReg=SDriver_HW_AddReg

[SDriverInstall.NTx86.Services]
AddService= SNXPSER, 0x00000002, SDriverService, SDriverEventLog
Include=msports.inf
Needs=SerialEnumerator.NT.Services

[SDriverService]
ServiceType=1
StartType=3
ErrorControl=1
ServiceBinary=%12%\snxpser.sys

[SDriverEventLog]
AddReg=SDriverEventLog_AddReg

[SDriverEventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\snxpser.sys"
HKR,,TypesSupported,0x00010001,7

[SDriverInstall_XP]
AddReg=SDriverAddReg
CopyFiles=SCopyFiles_XP,SCopyFilesDLL
Include=msports.inf
Needs=SerialEnumerator.NT

[SDriverInstall_XP.HW]
AddReg=SDriver_HW_AddReg

[SDriverInstall_XP.Services]
AddService= SNXPSERX, 0x00000002, SDriverService_XP, SDriverEventLog_XP
Include=msports.inf
Needs=SerialEnumerator.NT.Services

[SDriverService_XP]
ServiceType=1
StartType=3
ErrorControl=1
ServiceBinary=%12%\snxpserx.sys

Company

I-OMagic

Categories

Other Peripherals

Model

I-OMagic Magic I-O 1 ParAllel

Description

DR-IOEPP01 IEFD IDVD16DDMe DR-MD400 DR-CDRW1640

Operating System

Windows 95

Size Driver

196KB

File Name

iopci_win9x.zip

Observations

[Version]
Signature="$WINDOWS 95$"
Class=Ports
Provider=%String%

;
; Manufacturer Section
;
[Manufacturer]
%String%=Mfg

;
; Manufacturer Name Section
;
[Mfg]
%Port1%=SUNIX_S,SUNIX\PCI7168140916
%Port1%=SUNIX_S,SUNIX\PCI7168140932
%Port1%=SUNIX_S,SUNIX\PCI7168140964

%Port2%=SUNIX_P_SPP,SUNIX\PCI72681409SPP
%Port3%=SUNIX_P_ECP,SUNIX\PCI72681409EPP

%Port2%=SUNIX_P_SPP,SUNIX\PCI71681409SPP
%Port3%=SUNIX_P_ECP,SUNIX\PCI71681409EPP

;
; Install Sections
;
[SUNIX_S]
AddReg=SUNIX_S.AddReg

[SUNIX_P_SPP]
AddReg=SUNIX_P_SPP.AddReg
Reboot

[SUNIX_P_ECP]
AddReg=SUNIX_P_ECP.AddReg
Reboot

[SUNIX_S.AddReg]
HKR,,DevLoader,,*vcomm
;HKR,,Contention,0,*vcd
HKR,,Enumerator,0,serenum.vxd
HKR,,PortDriver,,comdrv.vxd
HKR,,ConfigDialog,,comui.dll
HKR,,DCB,3,1c,00,00,00,80,25,00,00,15,20,00,00,00,00,0a,00,0a,00,08,00,00,11,13,00,00,00
HKR,,PortSubClass,1,01
HKR,,EnumPropPages,,"comui.dll,EnumPropPages"

[SUNIX_P_SPP.AddReg]
HKR,,DevLoader,0,*vcomm
HKR,,Contention,0,*vpd
HKR,,Enumerator,0,lptenum.vxd
HKR,,PortDriver,0,lpt.vxd
HKR,,ECPDevice,1,00
HKR,,PortSubClass,1,00
[SUNIX_P_ECP.AddReg]
HKR,,DevLoader,0,*vcomm
HKR,,Contention,0,*vpd
HKR,,Enumerator,0,lptenum.vxd
HKR,,PortDriver,0,lpt.vxd
HKR,,ECPDevice,1,01
HKR,,PortSubClass,1,00
[Strings]
MULTIIOCARD=SUNIX
String="SUNIX CO., LTD."
Port1="PCI Serial Port"

Company

I-OMagic

Categories

Other Peripherals

Model

I-OMagic Magic I-O 1 ParAllel

Description

DR-IOEPP01 IEFD IDVD16DDMe DR-MD400 DR-CDRW1640

Operating System

Windows 98

Size Driver

196KB

File Name

iopci_win9x.zip

Observations

Company

I-OMagic

Categories

Other Peripherals

Model

I-OMagic Magic I-O 1 ParAllel

Description

DR-IOEPP01 IEFD IDVD16DDMe DR-MD400 DR-CDRW1640

Operating System

Windows XP

Size Driver

505KB

File Name

pciio_xp.zip

Observations

Access to Official Website I-OMagic

Home English

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 5 files for I-OMagic Magic I-O 1 ParAllel

Select Files