Comtrol VS2000 v.34 Other Peripherals > Downloads Drivers and Manual

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol VS2000 v.34

Description

Device Driver

Operating System

Citrix WinFrame 1.6

Version

2.35

Size Driver

372KB

File Name

1800002b.exe

Observations

Do NOT install this driver in Windows 2000/XP operating systems Driver for the Windows(R) NT Operating System, for:
InterchangeVS(TM) 1000 Series Communication Hub
InterChangeVS 2000 Series Analog Modem Hub
RocketPort Serial Hub
=================================================================
SCOPE AND LIMITS

Use this file to install the Comtrol software. This readme
file covers:

- Prerequisites
- Removing existing drivers and components
- Driver installation
- Installation troubleshooting
- Known software capabilities and limitations
- Technical Support contact information

VS1000/1100 and RocketPort Serial Hub Users:
For hardware installation or modem, printer, NT RAS (Remote
Access Service), or backup server installation and configuration,
see the Installation and Configuration Guide for your product.

VS2000 Users:
For NT RAS, modem reset, modem configuration, or backup server
installation and configuration, see the VS2000 VS-Link
Installation and Configuration Guide. For hardware installation
information, see the Hardware Installation Card that came with
the unit.

This product was developed and tested under Microsoft Windows NT
Release 4.0. Alternate instructions for Windows NT 3.51 are given
where needed. If you are using Citrix WinFrame, follow the
instructions for NT 3.51 and adapt as needed.
=================================================================
PREREQUISITES

This file assumes that you have already installed the Windows NT
operating system and that you have a basic understanding of
Windows NT operation.
=================================================================
REMOVING EXISTING DRIVER

Comtrol recommends removing older versions of the driver
before installing new releases.

1. Open the Control Panel and start the Network applet.

2. Select the Adapters tab.

3. Highlight Comtrol VS1000/VS2000.

4. Click the Remove button.

5. Close the Network applet.

6. Restart the server so that your changes take effect.
=================================================================
INSTALLING THE DRIVER

After you have extracted the driver files, follow these steps:

1. Right-click on the Network Neighborhood and select properties,
or open the Control Panel and start the Network applet.

2. NT 4.0: Select the Adapters tab and click the Add button.
NT 3.51: Click the Add Adapter button.

3. NT 4.0: Click the Have Disk button.
NT 3.51: Highlight Other and click Continue.

4. Enter the drive and directory path to the installation files
and click OK

Company

Comtrol

Categories

Other Peripherals

Model

Comtrol VS2000 v.34

Description

Device Driver

Operating System

Windows NT 3.51

Version

2.35

Size Driver

372KB

File Name

1800002b.exe

Observations

Do NOT install this driver in Windows 2000/XP operating systems. Driver for the Windows(R) NT Operating System, for:
InterchangeVS(TM) 1000 Series Communication Hub
InterChangeVS 2000 Series Analog Modem Hub
RocketPort Serial Hub
=================================================================
SCOPE AND LIMITS

Use this file to install the Comtrol software. This readme
file covers:

- Prerequisites
- Removing existing drivers and components
- Driver installation
- Installation troubleshooting
- Known software capabilities and limitations
- Technical Support contact information

VS1000/1100 and RocketPort Serial Hub Users:
For hardware installation or modem, printer, NT RAS (Remote
Access Service), or backup server installation and configuration,
see the Installation and Configuration Guide for your product.

VS2000 Users:
For NT RAS, modem reset, modem configuration, or backup server
installation and configuration, see the VS2000 VS-Link
Installation and Configuration Guide. For hardware installation
information, see the Hardware Installation Card that came with
the unit.

This product was developed and tested under Microsoft Windows NT
Release 4.0. Alternate instructions for Windows NT 3.51 are given
where needed. If you are using Citrix WinFrame, follow the
instructions for NT 3.51 and adapt as needed.
=================================================================
PREREQUISITES

This file assumes that you have already installed the Windows NT
operating system and that you have a basic understanding of
Windows NT operation.
=================================================================
REMOVING EXISTING DRIVER

Comtrol recommends removing older versions of the driver
before installing new releases.

1. Open the Control Panel and start the Network applet.

2. Select the Adapters tab.

3. Highlight Comtrol VS1000/VS2000.

4. Click the Remove button.

5. Close the Network applet.

6. Restart the server so that your changes take effect.
=================================================================
INSTALLING THE DRIVER

After you have extracted the driver files, follow these steps:

1. Right-click on the Network Neighborhood and select properties,
or open the Control Panel and start the Network applet.

2. NT 4.0: Select the Adapters tab and click the Add button.
NT 3.51: Click the Add Adapter button.

3. NT 4.0: Click the Have Disk button.
NT 3.51: Highlight Other and click Continue.

4. Enter the drive and directory path to the installation files
and click OK

Access to Official Website Comtrol

Home English Drivers English

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 6 files for Comtrol VS2000 v.34

Select Files